Gas heaters from the main gas. How to choose a gas heater from a cylinder

Date: 30.05.2021

Heating premises in modern conditions is carried out through different heating devices. A gas heater has been well established - a portable or stationary unit, working, depending on the design, from the main fuel or liquefied (balloon) gas.

Both options have proven itself and thanks to the high efficiency, and the absence of smoke and carbon monoxide gases. In general, this is an excellent solution for home heating, cottages and even a tourist tent. What kind of varieties exist and what is better to choose - in our article.

Wide selection of various designs

Manufacturers offer a large range of products created with the use of modern technologies and can effectively warm up due to the use of gas. In supermarkets and online stores, you can pick up an optimal gas heater for giving with economical fuel consumption. When choosing, it is worth paying attention to such types of devices:

Gas convector

In such devices, even with continuous operation, a plus associated with a sufficient degree of economy is manifested. Such devices for user reviews are an excellent alternative to classic gas boilers. During the purchase, you need to take into account the presence of two types of convectors: with a closed combustion chamber and with an open type of camera. The first type is relevant for any operation methods, and the second - it turns out to be problematic to use in residential buildings that are not equipped with a specific type of ventilation.

Catalytic gas heaters on balloon fuel (propane-butane)

The principle of operation of modern devices is significantly different from traditional heating systems. Inside the open flame is not formed in a classical representation. In the process of combustion, a ceramic tile is involved, which gets a gas jet. Such a work format ensures noiselessness, while the installation efficiency and the operation is quite safe.

Ceramic gas heater from the cylinder

Ballu BIGH-55F with composite gas cylinder 24.5 l

In essence, the work of the equipment resembles the exploitation of electrotopers warming the room due to the directional thermal emitting stream. There is an increase in the temperature of them not surrounding air, but items located on the way. Thus, it will be possible to more effectively by heat energy from fuel, significantly increase the efficiency.

Recently, the cylindrical installations of aimed action, the principle of operation of which consists in heating the air and move it further fan blades. Configure the desired flow helps an inserted power regulator.

Infrared radiation

The gas infrared heater from the cylinder turns out to be in demand. He is able to work not only indoors, but also on the street, providing a comfortable setting on an open lawn, in a gazebo or evening on the terrace. Thanks to the IR reflector, it is possible to provide fast and high-quality heating of the selected zone.

Infrared equipment is divided into two types:

Light

Ceramic devices, the operating temperature of which in the area of \u200b\u200bthe glow reaches 800 ° C. In the course of operation, they are glowing, forming around the visible area. The launch of the device with a cylinder or connected to the subordinate line is carried out using the opening of the valve. The gas stream rushes into the device, stirring with the tightened air. At the next stage, due to the divider, the gas is evenly distributed on the surface of the plate, burning.

Dark

The work area does not exceed the limit of 600 ° C. This mode does not provide glow. Gas also penetrates through a connected pipeline. In the highway, direct mixing with air is happening to form the desired concentration. At the next stage, the composition goes into the heat-resistant tube and is oxidized there, providing its heating and the walls of the emitter. Finding on the reflector, the reflector thermal energy is sent to the environment.

What are gas heaters

The convenience of such equipment is due to the large range of models, among which you can pick up both a portable gas heater and wall lightweight structures.

HOSSEVEN HBS-9 / 1V

All mobile installations work exclusively on a liquefied mixture of propane-butane from cylinders, but have a high protection factor. The unit is turned off at any of the potentially hazardous situations - a decrease in gas pressure, overturning the heater, an increase in carbon dioxide concentration, etc. Depending on the cost of the sample, the number of protection levels may increase.

Among this variety, 2 groups of goods are distinguished:

non-removable models operating on balloon fuel;
fat models connected to the highway.

There are no critical differences between them - neither in terms of protection or performance. It is convenient to buy a convector with a set of nozzles for different ways of connection - the balloon ended, switched to the highway and vice versa.

All equipment, regardless of the connection method, is equipped with chimney and has several levels of protection.

Stationary equipment can be installed on the floor (floor), ceiling (ceiling) and walls (wall samples.

Performance features

Choosing a gas heater of any design, it is necessary to take into account the balance between the positive and negative parties of the equipment. Convector type is endowed with such advantages:

compact dimensions;
heating of a flameless type;
heat transfer interval 3-15 kW;
no need for electricity liner;
oxygen does not burn out;
gas consumption efficiency is 0.3 kg / 1kW / h;
you can find a lot of budget models;
operation is not difficult.

The minuses include such parameters:

to disrupt combustion products from the room, it is required to break through the through hole in the wall for the coaxial pipeline;
we will have to make a hole through the gas highway;
a relatively small degree of inertia, which allows you to quickly heat and also cool down when it is turned off.

Infrared heating has such advantages:

local thermal impact is formed, without being distracted by the rest;
almost doubled infrared gas heaters more efficiently classic heating boilers;
the design allows you to direct the heat flux to any side;
mobile installations are easy to assemble anywhere;
heating is felt almost immediately after the start of the work;
the healthiness of the heater does not affect the degree of humidity and the amount of oxygen in the surrounding atmosphere.

Negative sides are noticeable in devices used outdoors:

requires periodic cleaning and calibration of equipment;
service maintenance has a considerable price tag;
there is a risk of explosion hazard on the street.

Providing protection

In order to efficiently and efficiently exploit the heating gas equipment for a long time, safety standards must be observed. It is also worth purchasing installations equipped with additional elements of protection and the possibility of flexible adjustment.

Manufacturers in many models took care of the presence of appropriate elements and nodes to which such blocks and systems include:

control of the vertical position allows you to automatically turn off the gas supply to deviation or drop;
the defensive service allows you to interrupt the flow if the leakage appears or the flame will appear;
adjusting the power parameters provides a smooth setting of the gas to create a comfortable environment and economical fuel consumption;
in progressive models there are air and carbonate analyzers;
adjusting fuel supply;
remote piezoelectric ignition.

Rating of the best models of gas heaters

Consider several top samples of proven brands.

Bartolini Pullover K.

Used for heating rooms of different types, including housekeeping and garages. Mobile apparatus is equipped with remote use wheels. The heater is a fiberglass catalytic panel. Does not throw waste into the atmosphere and does not give an unpleasant odor. It has a high degree of safety due to the flame sensor, protection against drops, carbon dioxide gas analyzer. Production - Italy. Cost - 10 700 rubles.

Timberk TGN 4200 SM1

Universal budget model in a compact building. Wheels allow you to move the machine to anywhere. Functions with a cylinder up to 12 liters, refined propane-butane. Provides heating due to IR radiation. Complete gas combustion on the ceramic plate occurs. Installed gas controlr and gas analyzer sensor. It starts from Piezorozal, endowed with the deflection from the deviation of the verticality. In the process of work, it is recommended to air the room. Price - 4,563 rubles.

Solarogaz Gia 2.9

The device is in demand for small rooms or local heating. It works from propane, weighs less than 2 kg, easy to operate and maintain. Provides silent work in the absence of a burning flame. Compact infrared device costs 950 rubles.

What to choose for home

The choice depends on the area of \u200b\u200bthe structure, time of residence, the quality of thermal insulation of the house and the presence of a highway. For a warmed house of year-round accommodation, choose instruments with a capacity of 2 kW per square room.

If there is a connection to the main gas in the house, not only convectors can be used as an addition to the main system of heating, but also as independent units. Today, blue fuel remains the most affordable way of heating. Balloon - a liquefied mix of propane-butane - suitable for all convectors, including street devices, infrared gas heaters, etc.

For dacha

Since the hypothetically cottage is a small house for seasonal accommodation, we will give averaged recommendations for choosing.

Simple inexpensive solutions for giving

Productive power. For room 20-25 sq.m. It is enough power of 3 kW, to 60 sq. M - 9 kW. The main thing is that the heating occurs evenly.
The security system does not depend on how to use the device. At least it should be a flame control, an automatic shutdown when the gas leakage, shutdown when tipping the convector, with an increase in carbon dioxide concentration, etc.
Universal connection. For the convenience of using the unit and in the presence of a main gas pipeline (even if it is not connected), you usually choose models with a set of nozzles so that you can switch from the balloon to the trunk and vice versa.
Mobile models designed for home and street. At the cottage - the perfect option, because it can be included both in the house itself and in the gazebo and just on the veranda.

For tourist hikes

Modern tourists, although few differ from Soviet, but they have much more opportunities for a comfortable stay in any weather and time of year. One of these benefits of civilization can be called a gas heater of different sizes and with different types of heating elements. There are 2 main options for sale:

Gas burner with a 1 kW reflector for heating and cooking. Such a device is sufficient for heating a tent with an area of \u200b\u200bup to 6 sq.m.
Ceramic capacity of 1 kW, designed for a similar area, but it cannot be prepared on it - just to pull the tent.
Catalytic - the most effective in terms of heating (not designed for cooking). At the same time, absolutely safe, lungs, silent and heat the room in a matter of minutes. Of the minuses of the device - the need to acquire original cartridges that cost how much the entire device as a whole.

Video: It will be interesting to tourists

Ceramic gas heater is a device with infrared rays. It works from the gas cylinder, and the heating element is a ceramic panel. Such a heater heats up not air, but the surface of the objects. The good heater must be installed on a flat and solid surface, in places where there is no wind.

Street gas heaters are also very common. The principle of their work is the same as in rooms, but externally they differ greatly. The main difference is that the gas cylinder is hidden deep into the metal base of the heater, which makes it very comfortable. They are often used in street cafes, gazebos, at dachas.

Safety of gas heaters

The essential plus of this equipment is its safety.

If you accidentally dropped a gas heater, it will automatically turn off. It will save you from unwanted fires.

The device always works stably, but if suddenly begin to work, the gas supply immediately stops.

Equipping the device with piezorozhig. Thanks to this device, you run equipment without extra effort.

Also, heaters maintain a certain temperature, so you can easily create a comfortable atmosphere indoors.

Gas heater for cottage

The heating temperature in such heaters is up to 800 degrees. Therefore, you can easily heat the room in 60 square meters. meters. And the heating capacity can be adjusted by three modes by setting the most optimal. Depending on the model and sizes of the heating device, gas cylinders from 5 to 50 liters are used, which can be fed to any gas station.

Garage gas heater

Recently, such devices have become very common and are very popular. They are used to heat houses, on construction sites, in garages. In garden sites, they are suitable for heat heating.

Our online store specializes in the sale of goods for home and cottage. Here you will find a large selection of gas heaters of different models and sizes.

In order not to become the hostage of the heating system and do not depend on the heating schedule, you need to take care of the heat in the country house or the country cottage.

The gas heater for the house will give heat in the offseason and winter, cold summer nights and in autumn weather. No need to buy expensive equipment - you should simply stock gas cylinders.

Benefits:

mobility;
independence from electricity;
simple installation;
IR emitters give warm on the street.

Disadvantages:

the presence of open fire;
absorbs oxygen;
highlights carbon dioxide and combustion products;
with a stationary connection, it is necessary to fit the main gas to each device separately.

How does the heater work?

The device is connected to the gas cylinder using the hose and gearbox. Some models can be connected to the stationary gas heating highway.

The scope of application of autonomous heaters is wide: country and warehouse, offices and garages, apartments and hangars. For tourist hikes, portable gas heaters for a tent are provided, and an infrared emitter is well suited for heating a greenhouse and homely liveliness.

Gas heaters device

Metal case;
Warmer;
Heat exchanger;
Control block.

Views and features

Gas heaters can function on two types of fuel:

natural gas;
liquefied gas.

By type of device, heaters are divided into such groups:

Catalytic;
Infrared.

Catalytic heaters are divided into:

a) gas burners;
b) gas guns;
c) portable devices;
d) gas convectors.

Convector heating occurs due to the natural or forced circulation of cold / hot air indoors. The instrument device has an automatic support system for a given temperature and independently controls the work process.

Infrared gas heaters for giving can function on natural and liquefied gas.

They can be divided into two types:

With a catalytic panel;
With a ceramic panel.

The ceramic panel gives a large temperature at the exit (up to 800 degrees) and is used for the heating of bulk areas, and also gives backlight. The catalytic panel gives a temperature of no more than 600 degrees, respectively, heats the room with a smaller area.

Street gas infrared heaters for open areas are very popular. These devices resemble street lights of consecration, only they also provide heat. These models provide a built-in tank for liquefied gas or connecting to the cylinder.

Gas tourist heater can work from a small canister for several hours. It is not capable of heating a large area, but to ensure the heat of the tent - it is suitable. Such a device is convenient for travel or business trips.

For heating tents, cars and small rooms, a gas heater with a piezoejig is also used. This device has a compact size of the kerosene lamp and is indispensable in hiking conditions. The lantern gives lighting and heat, works from the can, is designed for several hours of burning.

Industrial gas infrared heaters with screens for heating radiators are indispensable for bulk premises, in which it is impossible to establish conventional heating batteries. Such heating equipment warms the floor, machine tools, walls and workers. The advantage is obvious, since the heating of the air in a huge workshop is not profitable.

In addition, warm air is constantly weathered through the slots and windows. Another advantage of IR emitters is the selectivity of the heating zone: heat can be sent to the desired area, and not on the entire room immediately. Adjusting the burner mode allows you to selectively set the required temperature in different zones of the workshop.

Model Review: Bartolini

Barrtolini gas heaters with a ceramic panel - one of the optimal heating options in the country house. All Bertolini devices have a gas control sensor, which immediately turns off the gas supply when the gas is fed, and the CO2 sensor for controlling the unacceptable level of carbon dioxide indoors.

In Berrtolini devices, several heating modes are provided, with which you can install the necessary air temperature. For example, if you need to quickly warm the room, you can turn on the device at full power. And to support the necessary temperature in a heated room, you just need to reduce power.

The devices have compact size and low weight. For the convenience of moving the heater is equipped with moving wheels. A gas cylinder, a volume of 27 liters, is placed inside the case and joined with hose and gearbox. Bertolini devices can heat the room in 60 cubic meters.

To properly choose and buy a gas heater for giving, you need to pay the attention of the power: it must match the heated area. For an area of \u200b\u200bmore than 60 cubic meters, you should buy a gas heater with a capacity above 3 kW as in the case of gas furnaces for giving.
It is necessary to give preference to the instruments operating on all types of blue fuel - liquefied and natural.
For dacha heating, choose a simple gas burner without additional options.
If you choose a gas heater for the street, make sure that the gas control function is in the device, which stops supplying the gas when the flame is strangled with the impact of the wind.
The device must be equipped with a security system: automatic shutdown in case of tipping. Also, the device must be built into the sensor, which blocks the supply of gas if the flame goes out.
For closed premises, you need to choose a device with a detector of carbon dioxide: a special sensor turns off the device when the unsafe amount of carbon dioxide is reached.
An infrared gas heater for giving is well suited for one-time departures outside the city, and for stationary heating - convector.
In order to save energy, you need to choose heaters with an adjustable power mode. For example, you can buy an infrared gas heater designed to cover large areas, but use the minimum power for dinner for two.

Gas heaters for the cottage or country house are an excellent solution at a minimum of trouble, and this is a non-promotion, and the result of processing numerous reviews of the owners of these miracle appliances.

How do they differ among themselves?
How it works and what is its principle of work.
How to choose a model in accordance with the available area?
What is better for giving, as well as for a house with year-round living in it?
What is needed to pay the most important attention when choosing a device?

What is a gas heater?

Gas household heaters - portable or stationary devices designed to increase air temperature to values \u200b\u200bunder which a person feels comfortable. Depending on the model and, accordingly, the design, such devices can operate both from the main gas and on a mixture of propane-butane from cylinders.

Gas heaters for cottages and houses - differences, device, characteristics

By location and mobility:

By the method of heating and the principle of operation:

Gas - devices operate according to the principle of fluid fuel combustion (gas) in the inner space of an isolated chamber. In this case, the method of gas enters the energy resource, it connects and mixed with the injected air, after which the resulting mixture passes into the chamber, where the final mixing of the components occurs. Under the influence of pressure, the gas-air mixture enters the radiating panel zone, after which the oxidation of the mixture begins and as a result, combustion.

Depending on the design of the device, the camera can be closed or open.

The closed type of camera at the gas heater for the house, according to reviews is significantly more practical in operation than an analogues of an open type. In this case, the fuel, and the combustion products (outgoing gases) in no way can enter the air of the room where the device is installed.

To minimize the risk of gas from entering the open space of the room, the units with an open insulating chamber are equipped with air analyzers and safety reinforcement (valve), in the critical situation, these devices turn off the device automatically.

Manufacturers guarantee high-quality heating by gas units with a total area of \u200b\u200bup to 40 m².

Important! The instruments with an open type of camera are not recommended to be used in closed rooms without forced ventilation.

Gas catalytic heater - the name is due to the presence of a catalytic panel, it is used as a heating element through which the heat transfer is carried out. The most common material used for the manufacture of the panel - fiberglass to which is added as a catalyst, platinum impurity.

For catalytic combustion, the absolute lack of flame is characteristic. Giving the definition of this process, experts often use the term - "combustion of the surface", this is because there are flameless gas burners in catalytic heating devices. The process is committed due to the free oxidation of certain inorganic substances.

The devices of this group are functioning on a propane-butane mixture, some models for enhancing the convection of heated air are equipped with a fan heater, but what is noteworthy, for the normal operation of the gas catalytic heater, the fan is completely optional, it makes the device autonomous and independent of the power supply.

The average efficiency of such devices is 80%. One device of this type is able to drop the area up to 80 m².

Infrared gas heaters, have a significant difference from previous types of gas heating devices - they are able to heat not only the room, the subject, the floor or human section, but also raise the temperature of the air to comfortable in the open space (gazebo, balcony, terrace, lawn, etc. .). As a fuel, both natural and liquefied gas are used. As can be seen from the title, this type of instruments are equipped with an infrared reflector, which contributes to a faster and uniform heating of any area.

IR heaters, in turn, differ on:

"Light", ceramic - radiation with T from 800 ° C, in operation illuminate the surrounding space. The principle of operation of the gas ceramic heater for the cottage is very simple: after connecting the power supply (cylinder, highway) to the heater and opening of the gas valve, the gas enters the device where the air is mixed with the retractable air. Then, through the divider, the gas is evenly distributed along the inner surface of the ceramic plate, where the fuel combustion and heating the heating element occurs.
"Dark", catalytic - radiation with T not higher than 600 ° C, the light is practically not emitted. The principle of operation is similar to household infrared gas heaters equipped with a ceramic stove, here gas also enters the device, mixing with air, but now the mixture passes through the heat-resistant tube, where oxidizing, heats up itself and heats the walls of the emitting item. After that, heat is reflected, located behind a tube, sectional or solid reflector into space.

What is better for home with year-round living in it? Tips for choosing

The question is quite difficult, it is due to the fact that the buildings you need to drop out of all are different, someone has a big house in a few floors and lives there all year round, and someone has enough small, cozy cottage to relax. Accordingly, there are many differences - the area of \u200b\u200bthe structure, the flood, the insulation of the building, the availability of gas (highway, cylinder), etc.

Power

The area of \u200b\u200bheating is directly dependent on this indicator. The required power, on average, is calculated at each 1 m² of about 2 kW.

Fuel

Important! When using natural gas, it is necessary to have a chimney or pipe to remove exhaust gases into the atmosphere.

Availability of protection and regulatory devices

Regarding this item, something is difficult to advise something, since the more functions and additional possibilities of the gas heater for the cottage, according to the reviews, the device, and yet manufacturers offer a lot of fixtures that not only facilitate the setting and operation, but also provide maximum Protection.

Protection against vertical loss - disables the unit when tipping over.
Protection against gas leaks and when the flame is sweeping.
Power control (smooth or fixed) - makes it possible to significantly save fuel when maintaining the optimal temperature mode.
Carbon and air and air analyzers.
Adaptation adjusting the volume of fuel supplied.
Piezorozhig.

One thing can be said accurately - regardless of which the device will be selected, a powerful infrared gas heater for a home or a compact device, for example, a catalytic type, ideally suitable for a small cottage, everyone who will warm up this focus will be ensured warm and comfort.

Video: How to choose a gas heater for giving

A variety of heating devices were developed to heat residential houses, administrative, industrial, economic and many other premises. These include water heating batteries, various convectors, thermal guns, infrared heaters and much more. A gas heater is another modern heating device that is optimally suitable for heating the rooms of any type and even open areas.

In this review, we will look at:

the main varieties of gas heaters;
principles of operation of devices;
tips for choosing and buying such devices.

We also tell me where and how to make the most profitable purchase.

Principle of operation of gas heaters

Devices are represented by a large selection of all kinds of models that are characterized by the principle of action and power. All these devices combine one - they work from liquefied or natural gas, transforming it into thermal energy. Gas cylinders or gas highways can be gas cylinders as a gas source. The heating devices themselves are divided into stationary and portable.

The heat pipe heats the room burning gas. They are quite economical, like all devices running on gas.

Stationary gas heaters are convectors or heat guns that feed on the main or balloon gas. They are mounted in rooms inpatient and used as basic sources of heat. Such devices are distinguished by large sizes and high performance, and for their operation you need a chimney for removing combustion products.

Mobile (portable) models are designed for temporary or semi-permanent operation. They have small dimensions and less productivity. Most often, such models are performed in small-sized enclosures for floor installation. They are optimal for heating cottages, private houses and economic premises, in which there is no centralized gas supply.

On the principle of operation, heaters are divided into several categories:

infrared;
catalytic;
convection.

The principle of infrared heaters is very simple - inside them there are burners with metal and ceramic emitters. Heating, they begin to radiate infrared waves (thermal radiation). At the same time, the air near the heaters remains practically cold - only surrounding items are heated. Depending on the power, they can warp fairly large rooms and open areas.

In the combustion chamber of the catalytic device, it does not occur as such a combustion, there is a chemical reaction.

Catalytic gas heaters are built on the principle of oxidation of natural or liquefied gas. The flame is absent here, and the generation of heat is provided by a chemical reaction. Gas enters a special catalytic panel, where it starts to oxidize, contributing to heat generation. Heating is carried out on convection, infrared or mixed principle of action.

Convection gas heaters have an extremely simple device - their base is the basis of conventional burners, in which fuel combustion occurs. Air heating is carried out using special ribbed radiators. Due to the convection, the heated air goes up, after which the cold air masses arrive at its place. Two or three hours after the launch of such devices in heated premises, it becomes noticeable warmer.

Infrared gas heaters can create heat not only due to gas burning, but also due to catalytic oxidation. Separate models of such devices create thermal radiation streams and provide convection - thereby achieving fast and efficient premises.

Types of gas heaters

There is a fairly large selection of heaters on the heating market. They differ in their own principle of action and the scope of use. Let's look at some models from some categories in more detail.

As we have already spoken, catalytic devices warm the rooms do not at the expense of the direct combustion of the gas, but at the expense of its oxidation. As a result, we get absolutely silent and fireproof heating equipment. There are no burners, there is no raging and hissing flame. Heat is generated by a chemical reaction occurring on the surface of the catalytic panel. What are the advantages of this equipment?

Maximum compactness - catalytic gas heaters have minimal dimensions.
Lack of combustion products - heaters do not burn oxygen and do not distinguish combustion products to which cut and carbon dioxide.
Autonomous work - such devices do not need electricity.
Economical fuel consumption - gas consumption in such devices is minimal.
High security - the absence of burners and open flame is good protection against fires.

Despite the safety of catalytic heaters and the absence of dangerous combustion products, their operation in closed premises is not allowed - need to ensure good ventilation.

Catalytic heaters are very efficient heat generators. It is transmitted to heated rooms in two ways - with the help of convection or with infrared radiation. Some models use a double heating scheme. To improve characteristics and warm-up speed, individual models are endowed with fans that provide fast and uniform heat distribution.

Infrared gas heaters

If catalytic gas heaters are used primarily for room heating, then infrared burner devices can warm and open areas - platforms near pools, sports and playgrounds, country verandas, as well as open terraces of restaurants and cafes. The principle of operation of such devices is to generate infrared (thermal) radiation through the combustion of gas and heating the radiating elements. The radiation warms not the air, but the surrounding items that makes it possible to gently warm the rooms and open areas.

Infrared radiation is generated by ceramic and metal heating elements, and built-in reflectors are used to create a directional zone. Due to such a design, infrared heaters have a decent radius of action - for example, street models can warm items within a radius of up to 5-6 meters. And such an indicator is very attractive.

Natural or liquefied gas acts as fuel for infrared heaters. Most often consumers use balloon fuel, as infrared heating equipment refers to mobile (portable) technique. Separate models are equally equipped with slots to connect embedded cylinders to 27 liters - such devices are performed as a monoblock with a built-in (connected) cylinder.

If it is planned to operate in the premises, nothing prevents the infrared infrared to the gas line with a flexible hose.

Infrared devices are perfectly suitable for heating open areas, since it is not heated by air, but the surrounding items.

Advantages of infrared gas heaters:

the possibility of heating open areas and territories - other heating equipment is focused exclusively for internal use;
high efficiency - infrared heaters are able to quickly warm up fairly large on the area and the volume of the room;
autonomous work - the vast majority of devices do not require an electrical network connection.

There are some drawbacks:

devices with such principle of action burn oxygen - when using indoors, good ventilation requires (at least open windows);
low fire safety - despite the maximum security, infrared gas heaters can cause fire.

The combination of advantages and disadvantages is really interesting, and here there is a clear advantage towards the advantages. Therefore, infrared gas heaters have become excellent heating equipment for premises and streets.

Some devices can warp not only due to heat radiation, but also due to the convection of hot air - the dual scheme of work allows you to count on a quick heating.

Planning to buy a gas heater, but can not decide on the model? For heating open areas, we recommend purchasing a device in the form of a high lamp - it will provide the creation of a circular heating zone and will allow you to quickly heat the terrace, a veranda, a territory near the swimming pool or an open playground. Any outdoor model will suit to warm up economic premises.

Gas convectors have a good design and are able to replace standard heating radiators.

As for the heating of the premises, in this case it is advisable to use catalytic models - they provide safer to surrounding heat generation from gas. If there is a need and the possibility, you should look at stationary gas convectors. They have high performance and can warb the premises of a large area.

The disadvantage of gas convectors is that the chimney is needed for their work - for example, coaxial, used in conjunction with heating boilers with a closed combustion chamber.

Where to find the best prices and buy a gas heater with maximum benefits for your wallet? Try to look at Yandex.Market. Here you can find the most suitable model of the model and filter the list of proposals at the lowest price. Not bad rates can be found in many network stores outside the heating season.