Useful information (holofiber, sintepon). All products by tags. Where is used sintepon

Date: 08.06.2019

The filler a synthetic winterizer is a synthetic material. It is used everywhere: filling clothes, pillows, blankets, bedspreads, stuffing toys, furniture, sewing kitchen tacks, and so on. To save money, many often look for a synthetic winterizer wholesale in Moscow. In our store we sell materials in various batches, but buying in bulk, you will get a lower cost.

There are several types of sintepon:

1. Adhesive (emulsion). It is distinguished by the pomp that is lost after washing.
2. Needle punched. Such a synthetic winterizer is most resistant to mechanical stress, when compared with the other two types. Also, he is not afraid of washing, and products with such a filler are hardly produced.
3. Thermal (heat glued). Products with such a filler are wear-resistant, tolerate washing well, are lightweight and have a good indicator of thermal protection.

If you are going to buy a synthetic winterizer in an online store, then trust only reliable, for example, we provide our customers with only high-quality material. Getting from us a synthetic winterizer, you will provide yourself with all advantages of this filler:

-Ease,
-Softness,
- Good recovery after deformations,
- Hypoallergenic,
-Elasticity,
-Air.

With proper care for products with padding, you will enjoy the above qualities for a long time. And you can always buy a synthetic winterizer in Moscow at retail or wholesale in the shop www.sayt.

Lightweight, voluminous, resilient nonwoven material in which the mixture (including secondary artificial and natural, textile waste) polyester fibers. Fastened needle-punching, adhesive (emulsion) or thermally.

- bulk synthetic non-woven polyester fiber canvas. The word "sintepon" appeared as a result of combining two words: "synthetic" and "canvas." The raw material for polyester fibers is polyethylene terephthalate. It is used as a filler for blankets, bedspreads, pillows, women's and men's clothing, workwear, children's overalls.
In the industry environment there is no consensus on the concept of "sintepon", because There is no standard by which a terminological definition can be made. In this regard, "synthetic winterizer" refers to both synthetic fiber, and webs and layers, which are produced with its use. This determines the difference in qualities, properties: i.e. in fact, completely different materials can be called in one word “sintepon”, which is extremely inconvenient neither for specialists nor for consumers.

History of creation

Research on this thermoplastic began in 1935 in the UK. In the USSR, it was first received in 1949 and received the name Dacron ”, which is the abbreviated name of the place of his birth - LA boratories AT high molecular weight C connections BUT cademia H auk In the 1960s, Japanese experts developed a technology for producing a synthetic winterizer using thermal bonding. After its completion in Italy, the synthetic winterizer was put into production in many countries around the world.

A few decades later, it became the most widely used universal synthetic insulation in the world. It is used in the manufacture of upholstered furniture, in the lining of a coat, as a filler for jackets, sleeping bags, toys, bedding and even New Year's snow and Santa Claus uniforms.

Qualitative It combines remarkable properties: it is voluminous, lightweight, resilient, soft, durable, and its ability to retain heat can rightly be called outstanding. It has a uniform surface and the same shrinkage performance. In terms of its hygienic and ecological qualities, it even surpasses pillows and featherbeds from natural down and feathers, since micro-mites do not reproduce in it and it does not cause allergies. Sintepon has the property of moisture resistance and dries quickly.

And everything would be fine, but in recent years after the entrainment of padding polyester, a period of cooling and even distrust of it has begun. In order to figure out whether a sintepon is bad or still good, it is important to know what technology it was made of. There are three options for connecting the fiberglass fibers:

Glued - fibers are fastened with PVA glue. Such a synthetic winterizer looks attractive, looks lush and loose. But in order to make it appear more elastic, manufacturers often allow deliberate overdose of glue. For the manufacturer, this technology is the cheapest. And for the buyer - the most expensive, because at the very first wash, even at moderate temperatures up to 40є, the glue will dissolve in water and the synthetic winterizer will “fall” into lumps. And where is the guarantee that the glue in such an emulsion synthetic winterizer will be really harmless?
Needle punched - in this case, multidirectional fibers are mechanically fastened together by interlacing and fixed with needle combs with specially jagged needles. Such a synthetic winterizer is more reliable and blows less than glue, it tolerates washing better.
Thermofastened (Euro Synthepon) - for bonding fibers using elevated temperatures, the binder is a low-melting coating of polyester fiber. Such a synthetic winterizer has the best heat-shielding properties, it is the lightest and does not lose its qualities at all when washing and compressing.

Produce different densities depending on its purpose. For example, for pillows it should be from 300 g / m2, in quilted mattress covers - from 80 g / m2, as a gasket between the upholstery of parts and foam rubber in upholstered furniture-200 g / m2, etc.

The synthetic winterizer is made from primary raw materials, as well as from recycled polyester raw materials (sec-PET), remelted plastic waste (PET bottles, bags, disposable dishes, etc.). This significantly reduces the cost of the product, but critically reduces the quality and performance characteristics.
The advantages of the sintepon are in lightness, good heat-shielding properties and low weight, as well as relative harmlessness to humans. Sintepon is used for all types of insulated clothing, including children's clothing, as well as for the manufacture of blankets, bedspreads, sleeping bags and bivouac bags and other textiles.

The good thing with a synthetic winterizer has to possess such signs:

Sufficient lightness, elasticity and bulk.
Heat retention effect.
Lack of environment for dust mites, moths and mold fungi to appear in the product.
Good ability to recover.
The ability to use both dry cleaning and laundry at home.
Hypoallergenicity of this material.

But, speaking of the positive qualities of the filler, it is necessary to say about its negative quality, which may occur due to violations of the structure of the fibers.

This very violation occurs due to frequent washes of products, which, in turn, invariably leads to a deterioration in the appearance of the product, and to the fact that it starts to let in cold air flows.

Varieties of sintepon

sherstepon (winter sintepon),
sintepukh,
holofiber

Sherstepon or winter sintepon - canvas, which consists of wool and silicone fibers, bonded by thermal method. Usually used for the manufacture of winter coats, ski clothing, warm blankets.

Few people are familiar with the concept " sintepukh ". This type refers entirely to synthetic filler, which is made by combing polyester fibers. Compared to natural down, it has more heat-retaining properties. It is used most often in down-padded coats.

Holofiber - an environmentally friendly product, consists of a synthetic winterizer and multidirectional twisted fibers. Most used in pillows and blankets. The synthetic winterizer can be of different density: a thick and thin synthetic winterizer.

Caring for things with padding material

But the question arises, how to care for such material in order to prolong its operational life? Washing can be both manual and machine. But for machine wash it is better to choose the delicate mode. Such things do not need pre-soaking, you should not use a variety of bleach, as they violate the structure of the padding polyester. Things that use synthetic winterizer insulation should be washed at a low, not more than 40 ° C, temperature.

Maybe different quality. And as always, in the market of manufacturers there is a situation when some of the introduction of new technologies are trying to improve and improve the quality of existing material, while others in the pursuit of financial profits use in the production of low-quality synthetic winterizer, which was made from recycled materials - plastic bottles, disposable dishes . Consider the properties of sintepon and learn how to make the right choice of quality material.

Characteristics of a qualitative synthetic winterizer

This refers to the non-woven fabric and is characterized by a three-dimensional structure, elasticity. In addition, it has high strength and amazing softness. This material is characterized by a homogeneous surface and uniform performance during shrinkage. Due to such properties, the synthetic winterizer is used as a filler in furniture production, when it is necessary to create a spring layer between the molding material and the upholstery. The composition of the padding polyester are 100% polyester fibers. Sometimes cotton or wool is added in the production of the padding polyester.

There may be another question about the sintepon: what kind of weather is it suitable for?

The quality of the filler characterizes its ability to break into strips.

This material is moisture resistant. Due to these qualities, water quickly drains, leaving the surface dry.

This material, regardless of its operational life, retains its qualities without emitting dust or causing allergies.

It is completely harmless to human health.

Sintepon, despite the presence of some minuses, is very popular, and among categories of citizens with different income levels, as with a small price category, products from sintepon have many advantages. Responsible manufacturers work with high-quality raw materials, on professional equipment, gaining experience and applying it for the benefit of people.

Instructions for operation of sintepon

Synthepon products are recommended to be subjected only to hand-washing in a solution of synthetic detergents intended for wool, silk and synthetic fabrics. And you can use the universal detergents.

Water temperature when washing it is desirable to keep around 20-50 degrees depending on the type of padding used .
Wash and Wring - without twisting;
For drying - to lay out on a flat surface, away from sources of fire and heating devices, or you can steamed on a mannequin and press.
Ironing - it is recommended by the steam iron at a low temperature, avoiding strong pressure in order to avoid reduction of volume.

Ask a Question

Show all reviews 0

All products by tag

Related Products

Monochrome jackets are recommended in the summer security kit “M4”, “M5” or “M12” in the offseason. Elastic knit fabric elastic band at cuffs and waistband for comfort. Metal front “zipper” with an internal windproof valve. The camouflage version of this jacket is presented on the website. Pockets: 2 capacious outer pockets and 2 inner 1 with a zipper with a section for a fountain pen on the left sleeve Material: Twill (Twill) -100% polyester with PU coating Heater: Sintepon 150 g / m 2 Product weight: 44-46 / 170-176 rr - 631 g 48-50 / 170-176 rr - 662 g 52-54 / 182-188 rr - 689 g MAYBE, YOU WILL BE INTERESTED: If you are still flying in a dream, and you can not take your eyes off from a glider floating in the sky - you will not pass by this model. Flight jackets, which were supposed to combine functionality with conciseness, are reflected in this lightweight and practical city jacket. The shorter demi-season Pilot jacket does not hold down movements and is convenient for a bicycle, scooter or motorcycle. Thanks to a durable, water-repellent, non-crushable material (Twill (100% polyester with PU coating)) and a synthetic heat-insulated sinteponu (150 g / m 2) from which the jacket is made, the Pilot easily withstands bad weather, quickly cleaned and retains its original appearance for a long time. Elastic knit elastic at the collar, cuffs and waistband gently but reliably protects from the wind. Powerful metal front zipper with an internal windproof flap, one of its kind, claims reliability. Volume side pockets allow you to place everything you need and do not allow your hands to freeze, and for the safety of small items, the jacket is complemented by two internal pockets and a pocket on the sleeve. Monochrome jackets are recommended in the set for the summer form of "guard" in the offseason. On the camouflage version you can use false races. We strongly recommend using front-loading washing machines, in the event that you are the owner of a top-loading machine, we recommend washing clothes and equipment in a special mesh wash bag to protect against possible damage to the drum components of the washing machine. Before washing, you need to fasten all the zippers and velcro clasps and completely relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash gently at 30 ° C with a double rinse cycle (it is better to use two rinse cycles to ensure that all residual detergent is removed from the fabric and insulation) and spin at medium speed. It is permissible to use a tumble dryer at an average temperature (40-60 ° C) for 30-40 minutes or until complete drying, if the upper fabric is membrane, it is better to dry the product with a lining to the outside (turned inside out). You can dry the product in a suspended state with a lining to the outside. To remove stubborn stains, you can treat contaminants with a special compound, such as the Grangers Performance Wash or Nikwax Tech Wash, before washing, allowing the detergent to soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore DWR processing on warmed clothes or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not eternal. During the operation of the product, as well as after a certain number of washes, the efficiency of DWR decreases. If the water drops stopped rolling off the surface of the fabric and wet the fabric even after washing, it is time to restore the splash protection treatment. We recommend using special formulations to restore spray-proof fabric treatment in the form of a spray, or poured into a washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First, you need to wash the product in accordance with the washing recommendations, then use the selected composition to restore the splash protection treatment by spraying it directly onto the front of the product while it is still wet, or by running the second wash cycle, pre-pour the required amount of wash-in composition into the washing machine . It is necessary to strictly follow the instructions of the manufacturer of the means for restoring the splash-proof treatment shown on the package. Many means to restore DWR require thermo-activation, so it is better to dry the treated clothes and equipment in a tumble dryer or oven at an average temperature (40-60 ° C) for 40-50 minutes or until completely dry.

Adjustable straps for height adjustment Frontal zipper with two locks, unfastened both from above and below Additional fixation of frontal zipper from spontaneous opening Loops for a wide hip belt Belt adjustment in size with elastic bands movements Loops at the bottom of the trousers do not allow them to creep up Cuts on the zippers on the sides for easy putting on shoes Pockets: 2 side pockets 2 pockets on the hips Material: Oxf Horde (Oxford) -100% nylon with PU coating "Tourist" -100% polyacryl with polyamide coating Insulation: Sintepon 150 g / m 2 SIZE SELECTION: Download

Jacket with a detachable hood shortened, with a central zipper on the split zipper, on the knit belt attached to the stitched, stand collar, vtachnoy sleeve. On the shelves are the lower patch pockets, fastened with a band-zipper. Shelves and back with stitched yoke. Sleeves are three-sewed, with a stitched knitted cuff. On the left sleeve on the middle part there is a double patch pocket, fastened with a zipper braid. Stand collar. The bottom collar is made of fleece with a basic fabric turnout. Left shelf lining with patch pocket, fastened with contact tape. Gender: male Season: demi-season Main color: khaki Material: Polyester Material top fabric: Jordan fabric 100% polyester, Material insulation: Sintepon 1 layer at 120 g / m2 Material lining: 100% polyair Regulatory and technical documentation: GOST 25295-2003 Outerwear for men and women of the range of coats: suits, jackets, vests, incl. insulated windbreakers (demisez) Color: khaki Lower temperature: -10 Fastener: "lightning" Country: Russia Size table Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Men's height Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Chest girth, cm Waist girth, cm Girth thighs, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110- 116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Women grew that Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

Straight silhouette, mid-thigh length Hood with detachable hem, adjustable in volume and face oval. Insulated with two layers of synthetic padding, which is 270 g / m 2 Polyester lining with quilted polyester, which increases the service life of clothes (the padding pad stays in place during dry cleaning or wash) Frontal zipper with two locks, unbuttoned both on top and bottom of the jacket Windproof inner and outer valves covering the frontal "zipper"; edge on the hood; high collar and bottom sleeves, adjustable in size with Velcro with inside knit cuff, prevent the penetration of cold under clothes. Windproof flap and chest pockets are fastened with large buttons, which are convenient to use with gloves Pockets: two pockets on the chest and two on the sleeve two inside pockets four pockets at the bottom of the jacket Utyazhki: on the waist and on the bottom of the jacket Material: 100% Polyamide with PU coating Product weight: 46/176 rr -1140 g 50/176 rr -1207 g 54/182 rr - 1302 g 58/188 rr-1430 g Designed as a combat jacket, alleged serious inspection and testing, surviving bursts popular worship and the cooling period, she returned to us calm and confident in its reliability, functionality and durability. Warm, durable, windproof and water-repellent, thanks to the fabric used in the manufacture (100% polyamide with PU coating), Alaska provides complete protection against snow, wind, moisture and cold. Insulation - two layers of synthetic fiber synthetic winterizer (270 g / m 2), which, unlike fluff, does not absorb moisture and is not afraid of frequent washes. Polyester lining is quilted with it, which increases the service life of the jacket (the synthetic winterizer stays in place when dry-cleaning or washing). Unlike expensive membrane fabrics and downy heaters, these materials do not require special care for themselves and do not raise the price of jackets in transcendental heights. Characteristic for Alaska, a fur hood with a fur collar, in combination with a high collar, closes almost the entire face if necessary, and is adjustable in volume and face shape. The edge made of natural or artificial fur (at your choice) can come unfastened from a hood. The inner part of the door and the edge of the hood in contact with it are trimmed with a soft fleece. The windproof external and internal valves of the front two-lock zipper, a belt tightened by a cord and the bottom of a jacket are also serious barriers to wind and cold. Sleeves with inner knitted cuffs are regulated by velcro armor. The length of the jacket (to mid-thigh) allows you to stay in the cold for a long time, and the free silhouette does not hinder movement. Large buttons allow you to unbutton your jacket without removing gloves. The voluminous, warm front pockets are trimmed inside with a soft knitted fabric, and the large buttons of the upper pockets allow you to unbutton them with gloves. In addition to the six front pockets, there are two more pockets on the sleeve and two inside. Warm comfortable jacket is designed for a long stay in the cold. We strongly recommend using front-loading washing machines, in the event that you are the owner of a top-loading machine, we recommend washing clothes and equipment in a special mesh wash bag to protect against possible damage to the drum components of the washing machine. Before washing, you need to fasten all the zippers and velcro clasps and completely relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash gently at 30 ° C with a double rinse cycle (it is better to use two rinse cycles to ensure that all residual detergent is removed from the fabric and insulation) and spin at medium speed. It is permissible to use a tumble dryer at an average temperature (40-60 ° C) for 30-40 minutes or until complete drying, if the upper fabric is membrane, it is better to dry the product with a lining to the outside (turned inside out). You can dry the product in a suspended state with a lining to the outside. To remove stubborn stains, you can treat contaminants with a special compound, such as the Grangers Performance Wash or Nikwax Tech Wash, before washing, allowing the detergent to soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore DWR processing on warmed clothes or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not eternal. During the operation of the product, as well as after a certain number of washes, the efficiency of DWR decreases. If the water drops stopped rolling off the surface of the fabric and wet the fabric even after washing, it is time to restore the splash protection treatment. We recommend using special formulations to restore spray-proof fabric treatment in the form of a spray, or poured into a washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX. Direct Wash-In or Spray-On. First, you need to wash the product in accordance with the washing recommendations, then use the selected composition to restore the splash protection treatment by spraying it directly onto the front of the product while it is still wet, or by running the second wash cycle, pre-pour the required amount of wash-in composition into the washing machine . It is necessary to strictly follow the instructions of the manufacturer of the means for restoring the splash-proof treatment shown on the package. Many means to restore DWR require thermo-activation, so it is better to dry the treated clothes and equipment in a tumble dryer or oven at an average temperature (40-60 ° C) for 40-50 minutes or until completely dry.

Monochrome jackets are recommended in the summer security kit “M4”, “M5” or “M12” in the offseason. Elastic knit fabric elastic band at cuffs and waistband for comfort. Metal frontal “zipper” with an internal windproof valve. The camouflage version of this jacket is presented on the site, which allows using false Pockets: 2 capacious outer pockets and 1 inner 1 with a zipper with a section for a fountain pen on the left sleeve Material: Twill (Twill) -100% polyester with PU coating Heater: Sintepon 150 g / m 2 Product weight: 44-46 / 170-176 R- - 611 g 48-50 / 170-176 rr - 721 g 52-54 / 182-188 rr - 741 g MAYBE, YOU WILL BE INTERESTED: If you are still flying in a dream, and you can not take your eyes off the soaring sky glider - you will not pass by this model. Flight jackets, which were supposed to combine functionality with conciseness, are reflected in this lightweight and practical city jacket. The shortened demi-season “Shturman” jacket does not hold down movements and is convenient for a bicycle, scooter or motorcycle. From the jacket "Pilot" "Navigator" is distinguished only by the presence of patch collar. Thanks to a durable, water-repellent, non-shedding material (Twill (100% polyester with PU coating)) and a synthetic heat-insulated synthetic winterizer (150 g / m 2) from which the jacket is made, the “Shturman” easily withstands bad weather, quickly cleaned and retains its original appearance for a long time. Elastic knit elastic at cuffs and waistband gently but reliably protects from the wind. Powerful metal front zipper with an internal windproof flap inspires confidence with its appearance. Volume side pockets allow you to place everything you need and do not allow your hands to freeze, and for the absolute safety of valuable items, the jacket is complemented by two internal pockets and a pocket on the sleeve. Monochrome jackets are recommended in the set for the summer form of "guard" in the offseason. On the camouflage version you can use false races. We strongly recommend using front-loading washing machines, in the event that you are the owner of a top-loading machine, we recommend washing clothes and equipment in a special mesh wash bag to protect against possible damage to the drum components of the washing machine. Before washing, you need to fasten all the zippers and velcro clasps and completely relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash gently at 30 ° C with a double rinse cycle (it is better to use two rinse cycles to ensure that all residual detergent is removed from the fabric and insulation) and spin at medium speed. It is permissible to use a tumble dryer at an average temperature (40-60 ° C) for 30-40 minutes or until complete drying, if the upper fabric is membrane, it is better to dry the product with a lining to the outside (turned inside out). You can dry the product in a suspended state with a lining to the outside. To remove stubborn stains, you can treat contaminants with a special compound, such as the Grangers Performance Wash or Nikwax Tech Wash, before washing, allowing the detergent to soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore DWR processing on warmed clothes or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not eternal. During the operation of the product, as well as after a certain number of washes, the efficiency of DWR decreases. If the water drops stopped rolling off the surface of the fabric and wet the fabric even after washing, it is time to restore the splash protection treatment. We recommend using special formulations to restore spray-proof fabric treatment in the form of a spray, or poured into a washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First, you need to wash the product in accordance with the washing recommendations, then use the selected composition to restore the splash protection treatment by spraying it directly onto the front of the product while it is still wet, or by running the second wash cycle, pre-pour the required amount of wash-in composition into the washing machine . It is necessary to strictly follow the instructions of the manufacturer of the means for restoring the splash-proof treatment shown on the package. Many means to restore DWR require thermo-activation, so it is better to dry the treated clothes and equipment in a tumble dryer or oven at an average temperature (40-60 ° C) for 40-50 minutes or until completely dry.

Model - recommended for outdoor activities, hunting, fishing and tourism. The suit is equipped with voluminous “anti-theft” pockets - Jacket with zipper and closed with windproof button placket - Windbreaker belt inside jacket - Internal knit cuffs - Fixed adjustment at the waist, elbow parts and lower parts trousers - Additional reinforcements on shoulders, elbows and knees - Bottom of sleeves and trousers with elastic - Pants with a detachable insulated back on the straps. Sex: male Season: winter Camouflage color: snow forest (photo camouflage) Material: membrane Material top fabric: "Alova" (100% polyester) pl. 225 g / m.kv - tricot. Covered with moisture-proof membrane. Lining material: Cloth fabric LOKKER LINE (100% polyether) pl. 200 g Lining material: 100% polyester / back, shelf, hood - Fleece 180g / m2 Normative and technical documentation: GOST 25295-2003 Outer clothing for men and women of coats assortment: suits, jackets, vests, incl. Insulated windbreakers (demisez) Color: protective Lower temperature: -25 Lining / heat insulation: synthetic fiber Fastener: zipper Country: Russia Size chart Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86-94 76 -84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Men's height Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Chest girth, cm Waist girth, cm Hip girth, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110-116 56/58 110-118 94 -100 118-124 60/62 119-126 104-108 126-132 Female growth Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5 -6 170-176 167.0-178.9

Jacket with zipper and buttons, fur collar, insulated hood. On the jacket overhead volume pockets, inner pocket for documents, shoulder straps on the buttons. Bottom pockets are insulated. The volume of the jacket is regulated along the waist line. Gender: men Season: winter Primary color: black Material: Oxford (100% polyester), pl. 110 g / m2 Material top fabric: "Oxford" (100% polyester), pl. 110 g / m2 Material insulation: Sintepon 4 layers of 100 g / m2 Lining material: 100% nylon Regulatory and technical documentation: GOST R 12.4.236-2011 Special clothing for protection against low temperatures (2-4 protection classes) Fastener: "lightning "Country: Russia Size table Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Men's height Growth Growth Growth of a typical figure, see Growth interval of a typical figure, see 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Chest girth, cm Waist girth, cm Hip girth, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110-116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Female growth Growth Growth Growth of a typical figure, see Growth interval of a typical figure, see 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

Warm and durable winter jacket. The most popular model. The site contains a monochrome version of this jacket. False rags can be used Quilted polyester lining along with padding polyester, which increases the service life of clothes (synthetic winterizer stays in place when dry-cleaning or washing) Frontal zipper with two locks, unbuttoned both at the top and bottom of the jacket covering the front zipper, knitted cuffs inside the sleeves prevent the penetration of cold under the clothes. Stainless buttons are used. It is possible to equip the jacket with a hood, a thief. pockets and pockets Pockets: 2 chest pockets, 2 bottom jackets and 1 internal Utyazki: cord for tightening the belt and bottom of the jacket Material: Oxford (Oxford) -100% nylon with PU coating Heater: Sintepon 300 g / m 2 SIZE SELECTION: Download

Warm and durable winter jacket. The most popular model. The site contains a camouflage version of this jacket. False rags can be used Quilted polyester lining along with padding polyester, which increases the service life of clothes (synthetic winterizer stays in place when dry-cleaning or washing) Frontal zipper with two locks, unbuttoned both at the top and bottom of the jacket covering the frontal zipper, knitted cuffs inside the sleeves prevent the penetration of cold under the clothes. It is possible to equip the jacket with a hood, collar and linings. I have stainless buttons Pockets: 2 chest pockets and 2 down jackets 1 inner Utyazki pocket: cord for stretching the belt and bottom of the jacket Material: Oxford (Oxford) -100% nylon with PU coating "Tourist" -100% polyacryl with polyamide coating Insulation: Sintepon 300 g / m 2 SIZE SELECTION: Download

Jacket from a winter field suit for servicemen of the Armed Forces of the Russian Federation 2010 sample. Different from the original external wind and moisture-proof fabric, lightweight non-removable insulation and a more convenient central fastener. Outer fabric - Oxford PU (100% nylon). Unlike mixed fabric, the original does not get wet, protects against wind and has high strength. Light synthetic fabric lining. Central zipper, covered from the outside with a buttoned placket (in the original - buttons). It protects better from cold and wind, it is more convenient to work even with warm gloves. For simplicity and convenience, the insulation (synthetic winterizer) is made permanent. The amount of insulation is less than in the original, the jacket is more demi-season by purpose. Strengthening the elbows with overlays from the second layer of fabric. Cuffs fasten on the heel with velcro. Shoulder straps with velcro, sewn on the shoulders (the location of the new sample). False races in a set High wide collar lined in fleece. Velcro closure Hood warmed with a layer of fleece, retracts into the collar. Drawn down around the face, and in two dimensions at the back of the head. Velcro fastened on the front Waistline is pulled down with an elastic cord with two clamps on the wrong side of the jacket Hanger loop on the collar on the wrong side Pockets: two lower patch flat pockets with velcro flap chest pockets for warming hands. With a sloping entrance at a convenient angle, a fleece-insulated inner pocket for documents with a flap on velcro (from the heart), made of waterproof fabric. We strongly recommend using front-loading washing machines, in case you own a top-loading machine, we recommend washing clothes and equipment in a special mesh bag for washing to protect against possible damage to the drum components of the washing machine. Before washing, you need to fasten all the zippers and velcro clasps and completely relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash gently at 30 ° C with a double rinse cycle (it is better to use two rinse cycles to ensure that all residual detergent is removed from the fabric and insulation) and spin at medium speed. It is permissible to use a tumble dryer at an average temperature (40-60 ° C) for 30-40 minutes or until complete drying, if the upper fabric is membrane, it is better to dry the product with a lining to the outside (turned inside out). You can dry the product in a suspended state with a lining to the outside. To remove stubborn stains, you can treat contaminants with a special compound, such as the Grangers Performance Wash or Nikwax Tech Wash, before washing, allowing the detergent to soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore DWR processing on warmed clothes or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not eternal. During the operation of the product, as well as after a certain number of washes, the efficiency of DWR decreases. If the water drops stopped rolling off the surface of the fabric and wet the fabric even after washing, it is time to restore the splash protection treatment. We recommend using special formulations to restore spray-proof fabric treatment in the form of a spray, or poured into a washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First, you need to wash the product in accordance with the washing recommendations, then use the selected composition to restore the splash protection treatment by spraying it directly onto the front of the product while it is still wet, or by running the second wash cycle, pre-pour the required amount of wash-in composition into the washing machine . It is necessary to strictly follow the instructions of the manufacturer of the means for restoring the splash-proof treatment shown on the package. Many means to restore DWR require thermo-activation, so it is better to dry the treated clothes and equipment in a tumble dryer or oven at an average temperature (40-60 ° C) for 40-50 minutes or until completely dry.

Short jacket, with zipper, fur collar, removable hood, belt and cuffs on elastic band. On a jacket there are pockets on a lightning, on the left sleeve a pocket in a seam, shoulder straps on buttons. Gender: men Season: winter Primary color: black Material: Oxford (100% polyester), pl. 110 g / m2 Material top fabric: "Oxford" (100% polyester), pl. 110 g / m2 Material insulation: Sintepon 4 layers of 100 g / m2 Lining material: 100% nylon Regulatory and technical documentation: GOST R 12.4.236-2011 Special clothing for protection against low temperatures (2-4 protection classes) Fastener: "lightning "Country: Russia Size table Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Men's height Growth Growth Growth of a typical figure, see Growth interval of a typical figure, see 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Girth gr Wow, see Waist girth, cm Hip girth, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110-116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Female growth Growth Growth Growth of a typical figure, see Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

Jacket, with a detachable hood, shortened, with a central fastener on the detachable zipper, on the knit belt attached to the collar, stand collar, vtachnoy sleeve. On the shelves are the lower patch pockets, fastened with a band-zipper. Shelves and back with stitched yoke. Sleeves are three-sewed, with a stitched knitted cuff. On the left sleeve on the middle part there is a double patch pocket, fastened with a zipper braid. Stand collar. The bottom collar is made of fleece with a basic fabric turnout. Left shelf lining with patch pocket, fastened with contact tape. Gender: male Season: demi-season Main color: black Material: 100% polyester Material top fabric: Jordan fabric 100% polyester, Material insulation: Sintepon 1 layer at 120 g / m2 Material lining: 100% polyair Regulatory technical documentation: GOST 25295 -2003 Outerwear for men and women of the range of coats: suits, jackets, vests, incl. insulated windbreakers (demisez) Color: black Lower temperature: -10 Fastener: "lightning" Country: Russia Size table Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Men's height Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Chest girth, cm Waist girth, cm Girth thighs, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110- 116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Women's p ost Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

On camouflage jackets you can use false races. Elastic knit half-w / elastic band on cuffs and waistband for comfort. Metal frontal zipper with internal windproof flap. The site contains a monochromatic version of this jacket. Sleeve Material: Top material 45-P Shadow Alpha Industries - Splav: 100% nylon Twill (Twill) -100% polyester with PU coating Insulation: Sintepon 150 g / m 2 Product weight: 44-46 / 170-176 rr - 611 g 48-50 / 170-176 rr - 721 g 52-54 / 182-188 rr 741 g Additional discounts do not apply to goods with a red price MAYBE INTERESTING YOU: We strongly recommend using front-loading washing machines, in the case if you own a top-loading machine, we recommend washing clothes and equipment in a special mesh bag to protect against possible damage to the drum components of the washing machine. Before washing, you need to fasten all the zippers and velcro clasps and completely relax all adjustments. If the upper fabric is membrane, then it is better to wash the product with the lining out (turned inside out). Wash gently at 30 ° C with a double rinse cycle (it is better to use two rinse cycles to ensure that all residual detergent is removed from the fabric and insulation) and spin at medium speed. It is permissible to use a tumble dryer at an average temperature (40-60 ° C) for 30-40 minutes or until complete drying, if the upper fabric is membrane, it is better to dry the product with a lining to the outside (turned inside out). You can dry the product in a suspended state with a lining to the outside. To remove stubborn stains, you can treat contaminants with a special compound, such as the Grangers Performance Wash or Nikwax Tech Wash, before washing, allowing the detergent to soak for 10-15 minutes. It is better to store clothes and equipment with synthetic insulation in a straightened (not compressed) state. How to restore DWR processing on warmed clothes or equipment DWR is a special polymer applied to the surface of the fabric to make it water-repellent. DWR processing is not eternal. During the operation of the product, as well as after a certain number of washes, the efficiency of DWR decreases. If the water drops stopped rolling off the surface of the fabric and wet the fabric even after washing, it is time to restore the splash protection treatment. We recommend using special formulations to restore spray-proof fabric treatment in the form of a spray, or poured into a washing machine, such as Grangers Clothing Repel or Performance Repel, or Nikwax TX.Direct Wash-In or Spray-On. First, you need to wash the product in accordance with the washing recommendations, then use the selected composition to restore the splash protection treatment by spraying it directly onto the front of the product while it is still wet, or by running the second wash cycle, pre-pour the required amount of wash-in composition into the washing machine . It is necessary to strictly follow the instructions of the manufacturer of the means for restoring the splash-proof treatment shown on the package. Many means to restore DWR require thermo-activation, so it is better to dry the treated clothes and equipment in a tumble dryer or oven at an average temperature (40-60 ° C) for 40-50 minutes or until completely dry.

The suit consists of a jacket, pants and vest. The jacket is insulated: * stand collar * central zipper closure * chest patch patch pockets with velcro fastener * bottom multipurpose patch pockets with zippers and velcro tape * internal pocket for documents Jacket with a hood lined with a grid: * central fastener zipper * stitched hood with volume adjustment on the front cutout * the bottom of the jacket is regulated by volume with an elastic cord * sleeves with knitted cuffs * chest patch pockets with a clap Velcro * lower slit pockets with leaflets Mesh-lined trousers: * elastic belt with loops for a wide belt * tucks in the knee area provide freedom of movement * side patch pockets with flaps on the buttons Gender: male Season: demi-season Camouflage color : reed (photo camouflage) Material: "Alova" 100% polyester Material top fabric: "Alova" 100% polyester Insulation material: Sintepon 1 layer 120 g / m2 Lining material: 100% polyester - in a vest, mesh in a jacket and trousers Regulatory technical documentation I GOST 25295-2003 upper husband Clothing. and wives Coat assortment: suits, jackets, vests, incl. insulated windbreakers; TU 8572-019-52762127-2007 Color: protective Lower temperature: -10 Lining / insulation: sintepon Fastener: "zipper" Country: Russia Size chart Male size Chest girth, cm Waist girth, cm Hip girth, cm 44/46 86- 94 76-84 94-100 48/50 94-102 84-92 100-106 52/54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108 -116 118-124 Mens growths Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Female size Chest girth , cm Waist girth, cm Hip girth, cm 40/42 78-86 60-64 86-92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102 -110 84-88 110-116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Female growth Growth Growth of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

If we talk about fillers, the most popular in recent times are those that are easy to care for. Not demanding care - artificial fillers. If you say the phrase "artificial filler", most people immediately have an association with padding polyester. It would seem that everyone knows about him and actively uses it. But it is not so.

In this article we will talk in as much detail as possible about this material. You will learn what it is, what it is used for, how it is made and many more interesting things. So let's get started.

We understand the concept

Synthepon called not one kind of artificial filler, as it seems to many, but several. They all have different composition and, accordingly, characteristics. Different manufacturers have different technologies for the production of sintepon. Some adhere to the old system, some more modern. Some in production prefer high-quality raw materials, others save on it. You, probably, faced with the opinion that when you first heard the phrase "sintepon", many negative opinions about him. This is due to the hack of some manufacturers, which has put a negative imprint on the very concept of "sintepon." But this is just a stereotype.

Many other manufacturers are responsible for the choice of raw materials and produce the most high quality sintepon. It is possible to distinguish quality from poor quality at a price. If the raw material is used good - the price will be higher, if the price is minimal for the material, then the components in the composition are of dubious quality.

So what should be a quality sintepon?

The synthetic winterizer has received other name "synthetic batting". This is its duplicate, only advanced. If more - it is a non-woven fabric of synthetic fibers from primary or secondary raw materials (there are such and such).

As we have said, the concept of "sintepon" is a bit common, they can be called different types of material. These include wool, sintepukh, holofiber.

Sherstin or Sherstipon - non-woven fabric which contains sheep wool and thermal bonding fiber. It is lush and voluminous. Wool does not roll. Moisture does not hold for a long time, evaporates quickly.
Sintepukh - material is comparatively new. It is used, as a rule, for down-padded coats. It has the best qualities of fluff and padding polyester. Its main advantage is that this material is environmentally friendly and safe for the health of children and adults. This material is much warmer than fluff.
Holofiber- one hundred percent synthetic material. But the use for its production of materials that do not contain formaldehyde and other reagents, makes the composition of the material properties as close as possible to natural.

All these types are an improved version of the sintepon, in the manufacture of which additional components are used.

How to produce

Make a synthetic winterizer from several types of raw materials. For quality material, polyester fibers are used. The composition may include wool or cotton. If you look at the material, you can notice several layers that are parallel. High-quality synthetic winterizer is produced using machine technology, in which the direction of the fibers is different.

Another method of producing a synthetic winterizer is the recycling of plastic products (bottles, dishes, bags). It’s not worth talking about the quality, naturalness and safety of this material, but the price for it is very affordable. Such synthetic winterizer is deformed during washing and rolls. Such material may be of a different color, rarely white. It all depends on the raw materials that are processed. If it is green plastic bottles, the synthetic winterizer will have a greenish tint. If the blue garbage bags - bluish. Of course, if you buy things in which the synthetic winterizer is used as a filler, you will not be able to see the quality and color of the synthetic winterizer inside.

It is worth mentioning that the synthetic winterizer is made in three ways:

Thermal. Fibers stick together among themselves under the influence of high temperature. At the base - polyester fiber. It quickly melts at high temperature, which is why gluing occurs. Such a synthetic winterizer is not deformed, it is wear-resistant and does not “migrate” in clothes.

Glue or emulsion. Sintepon, made in this way, less quality. The PVA glue, by means of which fibers are glued together, is washed out during washing, due to which it is deformed. PVA glue is harmless to health, so the sintepon made in this way is safe. But not all manufacturers honestly relate to the process, and this emulsion is not always applied. It can be replaced by cheaper counterparts, which contain hazardous chemicals. To achieve better bonding, manufacturers use more glue than they need. With this they achieve airiness and tenderness of the material, but at the same time its life is reduced.

Needle punched. The filler made by this method is distinguished by its strength and good quality. Fibers that have a different direction are mechanically connected. For this there is a special machine with special needles.

How to create a new canvas

First, prepare a special compartment for polyester fiber, which is placed in it. In it, the materials are mixed, oiled and combed. At this stage, the components are fastened together, but not much. The full process is completed in a special furnace.

It's time to talk about the main characteristics of the padding polyester and its merits.

This material is very light, characterized by its airiness. He keeps warm. Once the synthetic winterizer was considered not the best insulation. But the world of modern technology does not stand still, because of which the production of material is constantly being improved and the quality of the padding polyester is becoming the best. Former errors are corrected, and the synthetic winterizer today is considered one of the best heaters. The newest options of a synthetic winterizer are warm, environmentally friendly, durable.

As well as any other material, the synthetic winterizer has the both positive characteristics, and negative.

Of the benefits:

Weighs little;
Feels like soft and airy material;
Keeps warm;
Inexpensive;
Elastic;
Differs in elasticity;
After crushing returns the previous form.

Minuses:

Outerwear with this insulation is suitable for non-climatic climate, as it retains heat only at a temperature not lower than -10;
The synthetic winterizer, made by the glue method, is not recommended to be used for children's things, as it is unsafe for health;
The thickness of the filler is reduced during the washings.
But because of the cheapness of the material, it is actively used to make various things, and lately it has become increasingly popular.

Where is used sintepon

This material can be found in completely different things - from furniture to children's toys.

Sintepon is used for furniture upholstery, thanks to him it turns out to create a beautiful shape and give softness to the product.
As a filler for outerwear and overalls.
They are filled with pillows, mattresses, blankets, covers, etc. It does not lose its shape even with machine wash.
It is used as a filler for children's soft toys.

How to care for padding polyester

It can be washed manually or using a “delicate mode”;
The recommended temperature is not higher than 30 degrees;
If you use machine wash, the drum should not be loaded more than half;
Spinning and drying are prohibited, soaking is also not recommended;
Rinse need at least 3 times;
Bleaching and washing powders with chlorine are not allowed, use non-aggressive washing agents, better liquid;
Ironing is allowed, but through the fabric and only at the minimum temperature without a steamer.

How to distinguish low-quality sintepon from quality

A synthetic winterizer made from recycled materials may smell unpleasantly, have a different, non-white color.

Buy high-quality sintepon cheap possible . We have only high-quality materials, reasonable prices and fast delivery. We have been selling high-quality fabrics and other materials for more than a year, which has earned the trust of customers.

Navigate and familiarize yourself with our product catalog. We will be glad to help you with a choice.

Insulation sintepon - non-woven material, which is made from polyester fibers by their temperature and adhesive processing. Often it, as well as usual fabric, deliver cloths in rolls. Material a synthetic winterizer is used for stuffing and stitches of clothes and house textiles. Therefore, its thickness varies in the range of 0.5 - 3 cm.

The synthetic winterizer may differ in color, texture and rigidity. Sellers can say that these are natural features for a sintepon, but, in most cases, these are signs of defective insulation.

What should be a quality sintepon?

How to choose a winterizer for winter?

White as freshly fallen snow

Quality material synthetic winterizer is always white, without shine. Its fibers do not have cavities, so it must be opaque. In the market you can find synthetic winterizer of pink, gray, blue and other shades. This is the first sign of its poor quality, which, unfortunately, is quite common. The only condition for the admissibility of differences in the color of the material is heat-insulating additives.

Sometimes, in order to increase the thermal insulation characteristics of a synthetic winterizer, manufacturers add fluff or wool to it. Only then are differences from white possible.

Determine the sintepon to the touch

When you touch a good heat insulation material to a synthetic winterizer, you feel its softness and elasticity at the same time. The surface of the material should be smooth, the structure - homogeneous. Often on the surface of the insulation you can see a solid crust, similar to the snow crust. Its presence will be explained to you by the consequences of transportation in rolls, assured that the synthetic winterizer will eventually get better. You are cheated! Insulation has already cracked and can not return to its original form by itself. Remember that both the inner and outer surfaces of the padding should be the same.

The structure of the padding polyester

High-quality thick insulation is easily divided into two or three layers. He stretches a little. Imperceptibly deformed into a thinner canvas, while creaking a little. If the sintepon is bad, then it will not drag on and quickly break. Insulation should not be folds and wrinkles. The qualitative heater of a synthetic winterizer does not wrinkle.

Sintepon - excellent material for clothing stitches. But still not the best choice for the manufacture of blankets and pillows. In due course the synthetic winterizer slyozhivatsya and gathers clots.

Now you know how to choose a synthetic winterizer for the winter. Do not let yourself be deceived and choose the best!

Holofiber and synthetic winterizer - the most popular synthetic insulation. Each of them is good in its own way and is widely used in various fields. However, the properties of materials have a number of fundamental differences that relate to wear resistance, thermal conductivity and shape retention. A person who has no experience, it will be quite difficult to distinguish these materials. And yet, it is worth a closer look.

Colour

A good synthetic winterizer is snow-white, opaque, dull. If the synthetic winterizer has shades, for example, grayish or pinkish, then this indicates its poor quality. An exception may be sintepon with admixtures of natural fibers.

The main difference between holofiber and sintepon is shine. At the same time, holofiber does not have shades, it is always white. Hollofiber has a porous structure, therefore, it appears slightly transparent to light.

Softness

High-quality sintepon - soft to the touch, quite resilient and dense. The surface of the canvas is always smooth. The surface of the low quality sintepon can be covered with a light crust. You should not buy such material, it will be tough and will quickly lose its properties.

The holofiber is considerably softer than the sintepon, it is light, silky to the touch and quite loose. The surface of the holofiber is never smooth, and the presence of a crust on this material is excluded.

The form

The synthetic winterizer is always produced in linen. The qualitative cloth of a synthetic winterizer can be easily divided into layers. If you try to stretch the material, you can hear a light crunch. Stretched synthetic winterizer is not restored. If this material is bent and left for some time, traces of bends will remain on it. After several washes, the sintepon loses its shape, and may even become completely lumpy.

Hollofiber is produced not only in the form of a canvas, but also in the form of balls, which are used as a filler for toys and home textiles. Holofiber is not divided into layers, and when stretching does not make any sounds. This material does not slyazhivatsya, not afraid of washing and never lumps lumps.

What is better: sintepon or holofiber

The choice of material depends on which product it is intended for. If the product does not involve frequent washes or is intended for temporary use, it would be more expedient to use a synthetic winterizer as a cheaper material that is not inferior to a holofiber in terms of quality. For home textiles and clothing insulation ideal holofiber.

By production of quilted products it is better to use a synthetic winterizer. It is more malleable and has the necessary stiffness for stitching. Holofiber to quit is much more difficult, it slips, and its fibers crawl out onto the surface of the fabric.

Choose your material wisely and beware of poor quality.