How many in the syringe 1 cubic. How many milliliters in insulin syringe

  • The date: 23.06.2020

It is important to understand what an insulin syringe is 1 ml, how to calculate the dosage. Patients with diabetes are forced to make injections on their own. They should be able to determine how much the hormone is needed, focusing on the situation.

Composition of drugs

To calculate insulin in the syringe, you need to know which solution is used. Previously, manufacturers made medicinal preparations with a hormone content of 40 units. On their packaging, you can find the labeling U-40. Now learned to make more concentrated insulin-containing fluids, in which 1 ml accounts for 100 units of hormone. The labeling U-100 is applied to such containers with a solution.

In each U-100, the dose of hormone will be 2.5 higher than in U-40.

To understand how many ml in an insulin syringe, you need to assess the mark on it. For injections, different devices are used, they are also the signs of U-40 or U-100. The calculations use the following formulas.

  1. U-40: 1 ml contains 40 units of insulin, it means 0.025 ml - 1 EI.
  2. U-100: 1 ml - 100 EI, it turns out, 0.1 ml - 10 EI, 0.2 ml - 20 EI.

To distinguish the tools conveniently in the color of the cap on the needle: with a smaller volume it is red (U-40), with a larger - orange.

The dosage of the hormone is selected by the doctor individually, taking into account the condition of the patient. But it is extremely significant to use the necessary means for injection. If you type a solution with a content of 40 EI in millilitress in the U-100 syringe, focusing on its scale, it turns out that diabetics will introduce 2.5 times less insulin into the body than it was planned.

Marking features

It should be sorted out how much the drug is required. Injection devices are available for injection devices with a capacity of 0.3 ml, the most common volume is 1 ml. Such an accurate dimension range is designed to have the ability to enter a strictly defined amount of insulin.

The volume of the injection should be focused on how much ML denotes one division of markup. Initially, the total capacity should be divided into the number of large pointers. So it turns out the volume of each of them. After that, you can calculate how many small divisions in one large, and calculate according to a similar algorithm.

It is necessary to take into account the not applied strips, but the gaps between them!

In some models, the value of each division is indicated. The u-100 syringe may contain 100 marks crushed with a dozen major. It is convenient to calculate the desired dosage. To administer 10 EI, it suffices to dial the solution to the figure 10 on the syringe, which will correspond to 0.1 ml.

U-40 usually have a scale from 0 to 40: each division is correlated with 1 insulin unit. To introduce 10 EI, you should also dial the solution to the figure 10. But here will be 0.25 ml instead of 0.1.

Separately, the amount should be calculated if the so-called "insulinka" is used. This is a syringe that contains not 1 cube solution, and 2 ml.

Calculation for another labeling

Usually, Diabetic has no time to walk along pharmacies and carefully select the necessary inventory for injections. Passing the term of the hormone administration can cause a sharp deterioration of well-being, in particularly difficult cases there is a risk of falling into anyone. If diabetics have a syringe at hand, intended for the introduction of a solution with another concentration, has to quickly recalculate.

If the patient is required to unitely introduce 20 EIs of the drug with the labeling U-40, and only the u-100 syringes are available, then not 0.5 ml of solution, and 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate it! You need to choose the same 20 EI.

How else use insulin syringes

ASD Fraction 2 is a well known to most diabetics. It is a biogenic stimulator that actively affects all metabolic processes passing in the body. The drug is produced in drops and is prescribed to insulin-dependent diabetics during type 2 disease.

ASD Fraction 2 helps reduce sugar concentration in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then syringe, if we are not about injections? The fact is that the liquid should not be contacted with air, otherwise the oxidation will occur. So that this does not happen, as well as for the accuracy of the reception, the syringes are used for the set.

Calculate how many drops of the ASD fraction 2 in "Insulinka": 1 division corresponds to 3 liquid particles. Typically, this amount is prescribed at the beginning of the drug, and then gradually increase.

Features of various models

Insulin syringes, equipped with removable needles, are on sale, and represent a one-piece design.

If the edge is soldered to the housing, the drug will be completely output. With non-removable needle, the so-called "dead zone", where part of the drug is lost. To achieve a complete removal of the medicine if the needle is removed, more difficult. The difference between the number of recruited and inaccurate hormone can reach up to 7 EI. Therefore, doctors advise diabetics to acquire syringes with non-removable needles.

Many use the injection device several times. Do it forbidden. But if there is no choice, then the needles are necessarily disinfected. This measure is extremely undesirable and permissible only if the syringe uses the same patient if it is impossible to apply the other.

Needles on "insulinks", regardless of the number of cubes in them shortened. The size is 8 or 12.7 mm. The release of smaller options is inappropriate, as some insulin bottle are equipped with thick traffic jams: you can simply not remove the medicine.

The needle thickness is determined by special labeling: the number G indicates near the letter G. It should be navigated when choosing. The thinner there is a needle, the less painful injection will be. Taking into account the fact that insulin is introduced several times daily, it is important.

What to pay attention to the execution of injections

Each insulin bottle can be used repeatedly. The remaining amount in the ampoule store should be strictly in the refrigerator. Before administration, the preparation is warmed to room temperature. To do this, take out the container from the cold and give to approximately half an hour.

If you have to use a syringe repeatedly, it must be sterilized after each injection to prevent infection.

If the needle is removable, then for a set of medication and its introduction, their different models should be used. It is more convenient to pick up insulin, and small and thin to make injections.

If you need to measure 400 units of hormone, then you can dial it in 10 syringes with the Marking U-40 or in 4 by U-100.

When choosing a suitable device for injection, it follows to:

Inserting insulin follows a little more (for 1-2 EI), since some quantity can remain in the syringe itself. A hormone is accepted subcutaneously: for this purpose, the needle is introduced at an angle of 75 0 or 45 0. This level of tilt allows you to avoid moving into the muscle.

When diagnosing a diagnosis of insulin-dependent diabetes, the endocrinologist must explain the patient as and when the hormone must be introduced. If children become patients, then their parents paint the entire procedure. For a child, it is especially important to correctly calculate the dose of the hormone and deal with the rules of its administration, since a small amount of the drug is required, and it is impossible to allow it.

1 cube in a syringe

how many in 1 cube syringe ml

In the Other education section on question 1 cube, cm Syringe - how many ml? The best answer specified by the author Sanya Sanya is a cm "3 and ml. Different names of the same volume. Milli 1 \\\\ 1000 liter \u003d 1000cm" 3 So think. Teas spoons are different.

1 \u003d 1 there! You are not equal now! Sensibility of still have a lot of friends! Generally in the KB. ML 1 ml goes!

kOLI4ESTVO 4AINIH LOZEK UMNOZIT NA 5)

1cm3 \u003d 1ml \u003d 30 drops (how do you put 5ml in a teaspoon 5ml? -Y syringe look at 5 ml (cm3) what kind of volume it is)

How many ml in 1 cube syringe? How many mg in 1 cube syringe?

1 Cube in the syringe is how many ml (milliliters)?

1 Cube in the syringe is how much mg (milligram)?

Cubes Syringe, slang title of its capacity in ml. One cube in the syringe means one ml. Medicinal solution. One ml. Water, weighs one gram. So, in one cube, the millilitress of water will be 1000 mg of the weight of this water. The amount of mg of the drug in the ampoule is determined by the percentage content. For example, we have one ampoule of 1% dimedrol volume in one ml. In a dry form, the amount of diphroll in 1 ml, its 1% solution will be 0.01 gr. That is, 10 mg.

The cube is a conversational name of a cubic centimeter, and if we talk about a cube of a syringe - this designation is 1 millilita (milliliter is equal to a cubic centimeter).

Thus, 1 cube of the syringe will always be 1 ml of fluid or a medication solution.

There are syringes of different tanks - per 1 ml, per 2 ml, per 5 ml, per 10 ml, etc.

Based on the foregoing:

1 ml syringe is the same as the syringe on 1 cube.

5 ml syringe is the same as the syringe for 5 cubes.

The syringe on 10 ml is the same as the syringe on 10 cubes.

As for the amount of mg (milligrams) in the cube of the syringe, this value will depend on which fluid or medicine in it is located.

For example, if you take water, then 1 ml of water \u003d 1 gram of water \u003d 1000 mg of water. That is, 1 syringe cube is 1000 mg of water.

In the case of drugs, the amount of mg per 1 ml and in 1 cube of the syringe will depend on how much active (acting) substance will be in 1 ml of solution.

This information is made to indicate annotations to the medicine.

Preparation of gentamicin. On the package you can see the following information:

"Solution for intravenous and intramuscular administration of 40 mg / ml".

"Solution for intravenous and intramuscular administration 80 mg / 2 ml".

This means that in 1 millilitress there will be 40 mg of active substance (gentamicin sulfate).

If a single dosage is 100 mg, then for injection you need to dial 100/40 \u003d 2.5 millilita or 2.5 cubics of the syringe.

1 cube - the conversational name of one cubic centimeter, i.e. This is a unit of volume, and therefore for fluid or bulk substances this unit will always be the same, it does not matter what it is: water, sour cream or sand, in the same and TOWA will always be the same volume. Millytr is also a volume unit and it is equal to one cubic centimeter. In other words, 1 cube \u003d 1 cubic. Santimeter \u003d 1 ml. But the weight will depend on the density of substances than it is higher, the greater will be the weight in one volume unit. For example, 1 ml of water is 1 g, and the sunflower oil has a greater density than water and therefore the weight of 1 ml of oil will be greater than 1 gr., Therefore, 1 cube is 1 ml, but the number of milligram will depend on the density of the substance that is measured. .

A cube is a slang that is used in medicine. In fact, there is no such official amount of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to prick the cube drugs, talk about one millilitress.

Accordingly, when purchasing the syringe themselves, they ask how many cubes are needed by a manipulation.

In this is how the mass concerns, it is impossible to say anything here, this parameter will change. Nevertheless, solutions have different density, and therefore, with the same amount they will have a different mass. Yes, and rarely we see the mass of the injectionary drug. Even if we are talking about powder, you still use a solvent.

The cube is a conversational designation of one milliliter. That is, 1 cube is 1 milliliter of medication in liquid form in the syringe.

The number of milligrams in the cube is more difficult to translate - it depends on the medication. Usually, the annotation indicates how much active substance and auxiliary components in grams contains in one millilitress of medication.

Being in the department (regardless of which is therapeutic, surgical, cardiology, resuscitation), one way or another has to face injections (injections).

Procedural and DR nurses most often consume that word - a cube (2 cubes, 5, 10 cubes, etc.).

Medical "Cube" This is Millytr:

1 cube is 1 ml;

2 cubes are 2 ml;

5 cubes are 5 ml.

For example, make an analgin cube - to make an injection of 1 ml of analgin.

As for mg, it (Number B-BA) is determined by the percentage content of the substance in the ampoule / bottle.

Syringe 1 cube is how many ml

syringe on 5 cubes Paul C ()

Insulin syringe. Ask in Pharmacy Inna Sodilova ()

For 3 ml of solution it is more convenient to take 5 ml of syringes, there are divisions (on the syringe) - everything is signed 1.2, 3,4,5 - it is ml, you need to score so much through the needle so that the fluid run out at the time of 3 for the flow ( )

Usually 1ml \u003d drop. There is a special "sticks" ending round tip, usually such as dripping. Zaretskii kostya ()

1ml is 1 cubic fluid. If this liquid is water, then this \u003d 1gram.

How many grams is 1 cube in the syringe?

The volume of the syringe and the drugs in NM is not measured in grams, but in milliliters, so it will not be possible to answer, since the entire drugs have a different mass and density. One milliliter contains one milliliter, and about the number of grams of drugs can be found from annotation.

One cube is a conversational designation of one millilitour or one large division on the syringe. One milliliter of water weighs approximately one gram. That is, in one cubicle of the syringe contains one gram of water. Approximately so much medical preparations on the basis of aqueous solution will be weighted, since the content of more dense active substances in them is several times less and the weight of the cube effect practically does not. Even if the alcohol solution is indicated on the package, it should be remembered that this is a very low-profile solution of alcohol and water in it anyway. So consider one cube for one gram and you are not very mistaken.

About how many grams of the active substance are contained in one cube (in 1 millilitress) you can learn on packaging with medicines. In front of me now packing diclofenac, there 1 cube contains 25 mg of the active substance. Each drug has a different dosage.

1 cube in the syringe is 1 milliliter, and how many in grams of the active substance happens on a box with injections.

One cubic centimeter is called a cube medication, but the cube accommodates a different number of grams. Drugs introduced through the injection have different ratios of grams and milliliters. To do this, you need to see the instructions or packaging, there is a recommended number of milligrams, and the definition of a cube is used by experienced doctors and nurses.

Cube, it is a measure of an amount equal to one cubic centimeter. And gram, it is a measure of mass. In one millilitress approximately 250 milligrams. And in order to calculate exactly, you need to read about the information about the density on the packaging and produce simple arithmetic action.

Everything will depend on the density of the fluid itself. Still, the chemical composition of each drug is different, the concentration of various components is not equal, so it is impossible to say exactly how many grams in one cube cannot be.

Those. In order to find out the amount of substance in grams, it is necessary to refer to the instructions of the drug / injection fluid. Plus, usually manufacturers indicate in grams separately active active ingredient compute; (i.e. the main), and separately auxiliary components are also in grams.

As an example, look the photo above. Here are not prescribed data, as in injections, but the active substance and auxiliary are clearly visible in the photo.

If we talk about water, then in one cube there will be 1 ml - the volume and 1 mg - weight. But for other liquids, mass in mg can vary, as it depends on the density of the substance. But this information must be on the packaging of the medicine.

When they say one cubic, then they imply one cubic milliliter. If you take one cube of water for example, then its weight will be 1 gram. In drugs, the weight of the cube will depend on their composition. Usually, the packaging indicates how many weighing all the components included in the cubic millimeter of therapeutic solution.

How many ml in Cuba Syringe

i discharged Sumamed, but I will not reach me how much to give it, there is a suspension of 100 mg / 5ml dosage to children: at the rate of 10mg / kg body weight 1 time a day, the child weighs 22 kg (5,5 years old) How many militers do I need to give a child? In the set of measuring syringe to 5 militers. The head does not consume: (. The topic was transferred to another conference, it is recommended to discuss it there! When writing a new topic, a big request to adhere to the subject of the conference.

Breeding medication for injection. Children's medicine

Breeding medication for injection. Medicine and Health

The child was appointed Ktetexin 10mg injections, in the vial, in the form of a powder, just as much as we need, and it is necessary to breed the medicine, so that it was not hurt. Novocaine - written on the packaging solution for injection of 5 mg / ml / 10 ampoules of 5 ml /, the doctor prescribed novocaine needs 0.5% -2.0, i.e. For breeding, I need to take novocaina just less than half an ampoule? Or am I wrong?

It is easier to buy a syringe 2.0 ml, according to the hatching exactly 2.0 ml

Can you get distracted from high and help me with a shallow household problem? :-)) Here I need to be, for example, to give the Malipus syrup in the amount of 20 drops 20 minutes before meals. And he consumes all food in the garden. Here's how I technically give him straight before the gate of the garden these 20 drops? Straight dripping on a spoon or there are other unknown ways for me? 🙂

Urgently. Children's medicine

what is "8 units in the insulin syringe" (we treat the animal)

what is written on the stripes?

Who did the injections to the child, you a question. Child from 1 to 3

Advise pliz. Daughter 1 year and 3 months The injections were discharged intramuscularly, a 1.2 cube medication (I use 2 ml of syringe). Is it necessary to put another needle for it for intramuscular injections or can you close the one that is attached to the 2 ml-syringe? It is 7 mm long less than "intramuscular" from 5 ml syringe, but Mom says that it is necessary to use VM needles even for infants so that there were no cones (she said the pediatrician, in his time). The needle from 2 ml of the syringe is thinner and about 3.5 mm long. It is easier for me.

How to drink bacteriophage?. Child from 1 to 3

Girls, help advice !! We found golden staphylococcus. Need to drink bacteriophage. But the problem is that we were last drank in infancy from the syringe, and now we are 3 years old and under any kind of daughter does not want to drink him (it is nasty taste and gadko smells). Pushed the bowl into her, so it broke out :-(. Than just not diluted, the smell remains. Tell me the method of receiving medicines. Och.

According to peptides, tell me pliz. SP: Sowdings

Tell me, please, who are in the subject))) how to mix them. There is a set of mimic wrinkles and moisturizing cream. I sit with them like a monkey with glasses. In the base, pour all the contents of the Ingi or to measure something you need to syringes? The leaflet with the instructions did not find. Heelp !! Shl. Peptides were collected here if that)))

Consider as an example of a recipe for serum against mimic wrinkles:

MATRIXYL SYNTHE'6 2%

Since we add only 6% of assets, thickener and preservative we do not need.

We take standard packaging in 50g or 20gr and calculate% input for each component

To find out the weight of assets for entering, we 50g / 20gr must multiply to the required% asset

If you have a pack of 20gr, then 0.2x4 \u003d 0.8gr

For Matrixyl: 0.5x2 \u003d 1gr (for 50g), 0.2x2 \u003d 0.4gr (for 20gr)

All components you can refuse the usual syringe from the pharmacy (they are sterile), after removing the needle. For each component, it is better to take a separate syringe.

Such cream is stored in the refrigerator for 6 months. Without risks loss of their properties, barbing or disruption of microbiological norms.

cedax. Child from 1 to 3

The probes from otitis 2 ml was discharged. Everything is in mg. This is a suspension. Question 1 mg \u003d 1 ml or not?

Help pliz, how much to "hang in grams" - medicine ..

i discharged Sumamed, but I will not reach me how much to give it, there is a suspension of 100 mg / 5ml dosage to children: at the rate of 10mg / kg body weight 1 time a day, the child weighs 22 kg (5,5 years old) How many militers do I need to give a child? In the set of measuring syringe to 5 militers. The head does not form: (.

It is probably so: 10mg * 22 \u003d 220mg, i.e. 11ml.

It turns out, 2 dimensional syringe and another 1ml.

How to give a child a medicine: 5 rules. Child health up to year

More children's drugs are often produced in the form of rectal candles, and in order to introduce them, a certain skill will be required, but this procedure is completely uncomplicated for moms and dads. What, how much and how often before giving a child a medicine, carefully examine the instructions for its use. Read what should be the appearance of the drug, its consistency, and be sure to check the shelf life of the drug. Pay attention to the storage conditions of the drug: some medications need to be stored at a certain temperature, without access light or even in the refrigerator. In advance, ask the doctor in advance, in which dosage and how much r.

It is impossible to independently reduce or increase the dosage of the drug or finish the course of treatment earlier than the doctor recommended. Memore correctly never let the medicine on the eyes. If a special dimensional spoon or dispenser is applied to the drug (it is usually produced in the form of a measuring syringe with divisions), it is better to measure the medicine, and not by conventional cutlery (tea or dessert spoon). It is more convenient (dispenser is easier to dial a bottle medicine), and there is no risk to make a mistake with the dosage. Use that measuring device that comes complete with this medicine: you should not take a dispenser from another drug, even if you think it seems to you that he is nothing about.

Questions about epics to Ukrainians and not only. Other children

I have a lot of questions, there is little time, so I throw off everything into one topic. We are now with Manyune in the hospital. They fell with a series of seizures of strong, on Thursday were already being discharged and here as charged: (in general, the horror is simple. We drink Depakin Syrup 3 cubes (measuring the syringe) and now added more Lamycal one hundred and twice a day. Dose to increase Will be. And with a small worse: (Yesterday, our doctor spoke with me. They suspected that we are not just epilepsy, but caused by a genetic violation, in.

We have no genetics also seen all sorts of genet. Symptoms - what they just were not suspected, and "happy doll syndrome" because of the beautiful face and long eyelashes, and we are really gothic, and we are really gothic :)))

But neither a karetype, no amino acid analysis showed anything :))

How to pour perfumes?. SP: Sowdings

Girls, I remember was the purchase of lots from us. And how did you pour them on the bottles? It is necessary to divide perfume very much))) And yet, where to buy empty bottles? thank

i really turn off the final - to pour everything

Poll about Cortexin. Other children

I looked asked in the search, I read something, but I still want to make a separate topic. Girls who are colole to children with their cortecin? It is advisable to write on ninks 🙂 questions such: 1. Dosage and frequency. How many days are the course, in a day or every day of the prick? 2. What bought? Novocaine or Piz. 3. How did children transfer the injection himself? Is he painful? 4. Diagnosis of a child. 5. Results (positive) after the course, if you were - what? 6. Side effects, deterioration - if so, what?

help plz calculate the dosage of medication. Pets

for my dog, 3 kg. It is necessary to add kocarboxylase to the dropper in the dosage of 0.02. It is for sale in a dosage of 50 mg. Neither the doctor nor the pharmacists in the pharmacy could really say to me how as a result get 0.02. In the packaging of the ampoule with the powder of 50 mg of cocarboxylase and ampoules with water for injection of 2 mg. I asked in the pharmacy whether I need to take 5 ml of spires. No ridges, it is necessary 2 ml. I read in the instructions - it is written there in 5 ml syringe. But it is FIG with it, buy. How to measure 0.02? For some reason I was told that.

5 milligrams - is it how much?. Child from 1 to 3

Girls who know 5 milligrams - how much will it be - a teaspoon or less? And then the doctor prescribed a medicine, and it is written there - a one-time dose - 5 milligrams.

How much is a PIRANTER for prevention? Children's medicine

I bought a pyrantel-suspension child. I did not understand anything from the instruction. Ascaridosis and enterobiosis. Mixed invasions once in a dose of 10 mg per kg. Next, there is a table (unnecessary removal, child 3 years) Age of the dose of the drug Quantity in 2 years - 6 years 250 mg 1Mer \u003d 5ml Ankylostomyomy: prescribed in a dose at the rate of 10 mg per kg for three days, noncatorosis: during severe forms are prescribed at a dose at the rate basis 20 mg per kg for three weeks. I do not understand how to give a child for prevention (it seems to me that.

It is necessary to give it once. Pyranthel's drinks must have all family members at the same time. The adult dose is also determined by 10mg per kg, or if approximately adults are up to 75 kg - it is necessary to 15ml Pyrantel, i.e. 3 measurements.

Spend at home cleaning. Change linen.

To make it easier for itching, fit the child, lubricate with children's cream at least. If you suspect that the child has an increment, then this is no longer prevention, but treatment. If there are no worms, then the drug does not act on the missing worms, i.e. He will not warn the appearance of worms.

I just explained the dose, it's not advice to take or not take the drug - it should be your decision.

Rectors: In which cases it is necessary to additionally register a child

After some time, a wolf appetite can attack him, and he will eat much more. The toddler's stomach was accustomed to the small volume of milk, so more than a meal will fit in it, a few days will pass. Dimensional feeding from the bottle gives the baby the opportunity to stop there when he was saturated. For a week you will understand how much detectors need a baby at different times of the day. Offer at first doctors, then the chest. Some children are better sucking the chest on a full stomach. If the baby badly gained weight, he needs not just to grow, but also catch up. For accelerated growth, more food is needed, so it is not surprising that first the baby eats so much. The rapid growth at this time will be noticeable along the sharp curve.

Adaptations for the chest kid detector Presentation Method Pluses Minuses Comment Spoon Easy and fast way for a small amount of detector. Laborious and uncomfortable for a large amount of detector. A good way for a pose of a pose. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for the chest) light and fast method for a small amount of detector. Working for a large amount of detector. Put the baby on your knees so that his head is raised. Put your feet on the coffee table, etc. During the doctor, let the baby suck the finger. Watch that the tip of the syringe or pipette is not stuck in the sky or the cheek of the baby. Small

Cum: wrestling for quality. Analyzes and surveys before.

The quantity and quality is the first, which is defined in the laboratory, is the time of the fusion of the ejaculate. Initially, the sperm is absolutely liquid, then quickly thickens, and after some time under the action of prostate enzymes again becomes liquid. The correctness of the transformations can be judged by viscosity change. For this, the ejaculate is gained in syringe and released through a special needle. Viscosity is measured along the length of the "thread", which stretches for the released drop. The sperm is considered to be discharged if the "thread" does not exceed 2 cm. Normally occurs in 10-40 minutes. If the process is delayed, then? There are problems with prostate gland. After the discharge using the indicator paper, cum is tested for acidity. WHO Recommended.

30 drops how much in milliliters?. About her, about maiden

My husband, at my request, bought in the production department of the pharmacy Drop Morozov in the production department (those that help sleep), so these goats (I can not call otherwise) they are packaged now in ordinary bottles that do not allow dripping through the lid. Here's how you want, so death 30 drops: ((at least warned, he would have taken a pipette. There is an idea to celebrate the syringe, but I can not find the volume of drops.

Young mother, or first days in the maternity hospital. Establishing chest.

Determined the norm in 40 g for each feeding, they said to wake and feed any every 2 hours, counting from the start of feeding. The bottle was urgently purchased, and I began to join. But now, from the fact that the collapse began to replace the milk and the breasts have been crowded on the 4th day, I started stagnation. From his swelling as 2 pillows of the bust, I could not pass the bigger, how much I neither milane. I didn't help even the hospital electric milk pump, which buzzed at full capacity, but squeezed only a couple of drops. Dreaming to me by this moment the mechanical was already at home, and it was not possible to pick it up. If I could not get milk, then what was the same to do this to my weakened daughter! One of the weighing, for example, display.

You are well done that they fought. Husband is gold. I wish you all the joys more.

The fact that the doctor prescribed. We give a medicine to the infant.

It is unacceptable to use drugs with an expired shelf life, incorrectly stored, with traces of damage, with an erased and unintelligible inscription. Rule Third: Observe the dose-appointed dose, time, method of receiving, multiplicity and duration of the use of medication. Before the doctor's care, you specify whether you understood the dosage scheme: how much, how, when (before, during or after eating), how often and how long the child should take medicine. Never give a medicine "to the eye" - measure the prescribed dose with the help of a special dimensional spoon, pipettes with divisions, a measuring tube or a syringe without a needle; Before you give a medicine to the child, check if you measure the dose. Use only pure measuring dishes. Reception of drugs must be regulated.

If such a need is still there, then divide the tablet very precisely sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, it is necessary to give a 1/8 tablet to the child: type in the syringe exactly 8 ml of boiled water, release into a cup, then grind a whole tablet and dissolve it there, then dial only 1 ml of solution into the syringe from the cup and let the baby drink. The solution prepared from the exhaust tablet can only be used immediately after its preparation - it is not subject to storage and is used once; For the next dose of the drug, the solution is reproduced.

Few milk? It is worth understanding! Part 1. Establishing the chest.

The use of substitutes of the mother breast: pacifier or bottles with a nipple. There is a simple rule: "Sucking nipples - minus feeding (minus breast stimulation for sufficient lactation and minus some kind of milk for a child)". Doping baby with water and / or other liquids. Obviously, how much baby swept, he did not eat mom's milk as much. Water fills the tiny stomach, gives a false sense of saturation. It is known that simple water (not the one that is contained in maternal milk) is not assisted by a child, i.e. There is no relation to the prevention or treatment of dehydration, but only passes through the gastrointestinal crumbs, while leaning the flora, which "helps to make up" breast milk.

No much. How much can accumulate waters?

Major and multi-way during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, in 10 weeks of pregnancy, the amount of amniotic fluid is an average of 30 ml, a shame is about 100 ml, in 18 weeks, etc. The maximum volume is noted by ky of the week of pregnancy, on average module ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of an increased removal of a liquid from the body of a woman. The accumulative water performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, protect the umbilical cord from the compression between the fetus body and the walls of the uterus. Thus, the volume of accumulating waters is a kind of indicator of the normal course of pregnancy. What.

Parental needlework. Part 2. Care for the child up to the year

How to care and treat baby at home.

Moreover, if the drops are placed in a sterile bottle, then we get the opportunity not to disturb its tightness: we wipe the rubber cork with alcohol, piercing the needle and score into the syringe. The needle takes out from the bottle and disconnect from the syringe. As a result we have a container with sterile mortar. The container that does not differ and is not broken, which is convenient to warm and conveniently apply. The nose in order for the drug to make an action, the nose is preliminarily cleaned, of course, if there is a cluster of mucus in the nasal strokes. Children of the conscious age will be fulfilled.

Artificial feeding. Artificial feeding

How to correctly calculate the desired volume of the mixture? With artificial feeding, it is important to determine the necessary amount of child's nutrition. The daily amount of food depending on the age of the baby is given in Table 1. For example, if the kid is 1 month and its mass of 3500 g, then the daily power supply is 1/5 body weight, i.e. 700 ml. To determine how much mixture is needed into one feeding, divide the daily meal for feedings. An approximate amount of feeding during the day: the first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if with breasts

I am mom in Cuba! Multiple pregnancy

Mom in Cuba: The real story of an ordinary woman who has safely endured and gave birth to a trip, while retaining the excellent sense of humor.

And now - one yell, the second sleeps, the third crushed. Who to run, what should I do? I'm in the hospital. One with three lying in the ward. Thanks to the hospital, I learned to at least swearing there. The seam hurts, the head is spinning, and you need to wash the floors not only in your ward, but also in the common kitchen, running with three procedural and in doctors, who are sitting on different floors, take and get diapers, keep a diary when who, who And how much it was and described, collecting urine, wearing every day kids on the control weighing and the most after each feeding them. I have no second to sleep. At night, the worst thing begins. The kids hurt the tummy, and they are in a choir. "It will go to three months. Or maybe not to go to three, "the nurse's duty dismissed and slowly deleted. I'm going crazy. Ambassador

Kogitum - Open ampoules can be stored?. Other children

Assigned Kogitum, 1/4 ampoules 2 times a day. Given the price of the drug, I would like to use an ampoule at least for a day, and even better - for two. Can I store it open, no one specified? thank

Mom makes injections - need help. Your experience and knowledge is needed.

Who has experience in this business? Your help is needed, And then my brains now boil 🙁 I appointed a child a course of treatment, I discharged a bunch of drugs, incl. You need to make injections: 1. Celebricsin 1,0ml intramuscularly 2.Akthegin 2,0ml intramuscularly 3.Newsidin 5mg 0,5ml intramuscularly injections to do mom, i.e. I myself. I'm terribly afraid, while in life, no ships itself did. The experience is only in the breeding injection of Cortexin and, accordingly, I saw where to prick and how to enter. Those. from.

Please transfer drops to ml. SP: Sowdings

It is necessary to give a child 10 drops of medicine, and there are no pipettes :-( There are a syringe. Who is not too lazy, please reflect how many ml give.

The child refused his chest. Part I. Breast Refusal

Over time, with regular feeding, the nipple acquires a normal appearance. If it does not work, feed with feeding overlays. You can try to pull the nipple. True, it was better to start studying before childbirth. Make a simple mechanism: a one-time syringe 5 ml is removed the piston, cut off the knife that part of the syringe, where the needle is inserted, so that the tube is inserted. Insert the piston in the cut end. With a free end (where the streams for the fingers) apply to the nipple and pull the piston so that the nipple dragged inside the syringe. Leave for a while. With regular classes, the nipple will stretch. Different breasts cause. One breast suck is easy, and another for some reason is complex.

©, 7Y.Ru, certificate of registration of media email number FS.

Reprinting messages from conferences is prohibited without specifying a link to the site and authors of the messages themselves. Reprinting materials from other sections of the site prohibited without the written consent of the company Alp Media and authors. The edition of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing is carried out by KT-Alp.

7Ya.ru - information project on family issues: pregnancy and childbirth, education of children, education and career, home economy, rest, beauty and health, family relationships. The site employs thematic conferences, blogs, ratings of kindergartens and schools are conducted, articles are published daily and contests are held.

If you find mistakes on the page, problems, inaccuracies, please let us know. Thank!

if you need 5 ml, then take a 5 cc syringe.

A teaspoon is 5 ml, and a two-cubic syringe is 2 ml - by tags, but if you dial it up to the stop - it will be a little more - about 2.5 ml, it can slightly larger.

How many ml in 1 cube syringe? How many mg in 1 cube syringe?

1 Cube in the syringe is how many ml (milliliters)?

1 Cube in the syringe is how much mg (milligram)?

Cubes Syringe, slang title of its capacity in ml. One cube in the syringe means one ml. Medicinal solution. One ml. Water, weighs one gram. So, in one cube, the millilitress of water will be 1000 mg of the weight of this water. The amount of mg of the drug in the ampoule is determined by the percentage content. For example, we have one ampoule of 1% dimedrol volume in one ml. In a dry form, the amount of diphroll in 1 ml, its 1% solution will be 0.01 gr. That is, 10 mg.

The cube is a conversational name of a cubic centimeter, and if we talk about a cube of a syringe - this designation is 1 millilita (milliliter is equal to a cubic centimeter).

Thus, 1 cube of the syringe will always be 1 ml of fluid or a medication solution.

There are syringes of different tanks - per 1 ml, per 2 ml, per 5 ml, per 10 ml, etc.

Based on the foregoing:

1 ml syringe is the same as the syringe on 1 cube.

5 ml syringe is the same as the syringe for 5 cubes.

The syringe on 10 ml is the same as the syringe on 10 cubes.

As for the amount of mg (milligrams) in the cube of the syringe, this value will depend on which fluid or medicine in it is located.

For example, if you take water, then 1 ml of water \u003d 1 gram of water \u003d 1000 mg of water. That is, 1 syringe cube is 1000 mg of water.

In the case of drugs, the amount of mg per 1 ml and in 1 cube of the syringe will depend on how much active (acting) substance will be in 1 ml of solution.

This information is made to indicate annotations to the medicine.

Preparation of gentamicin. On the package you can see the following information:

"Solution for intravenous and intramuscular administration of 40 mg / ml".

"Solution for intravenous and intramuscular administration 80 mg / 2 ml".

This means that in 1 millilitress there will be 40 mg of active substance (gentamicin sulfate).

If a single dosage is 100 mg, then for injection you need to dial 100/40 \u003d 2.5 millilita or 2.5 cubics of the syringe.

1 cube - the conversational name of one cubic centimeter, i.e. This is a unit of volume, and therefore for fluid or bulk substances this unit will always be the same, it does not matter what it is: water, sour cream or sand, in the same and TOWA will always be the same volume. Millytr is also a volume unit and it is equal to one cubic centimeter. In other words, 1 cube \u003d 1 cubic. Santimeter \u003d 1 ml. But the weight will depend on the density of substances than it is higher, the greater will be the weight in one volume unit. For example, 1 ml of water is 1 g, and the sunflower oil has a greater density than water and therefore the weight of 1 ml of oil will be greater than 1 gr., Therefore, 1 cube is 1 ml, but the number of milligram will depend on the density of the substance that is measured. .

A cube is a slang that is used in medicine. In fact, there is no such official amount of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to prick the cube drugs, talk about one millilitress.

Accordingly, when purchasing the syringe themselves, they ask how many cubes are needed by a manipulation.

In this is how the mass concerns, it is impossible to say anything here, this parameter will change. Nevertheless, solutions have different density, and therefore, with the same amount they will have a different mass. Yes, and rarely we see the mass of the injectionary drug. Even if we are talking about powder, you still use a solvent.

The cube is a conversational designation of one milliliter. That is, 1 cube is 1 milliliter of medication in liquid form in the syringe.

The number of milligrams in the cube is more difficult to translate - it depends on the medication. Usually, the annotation indicates how much active substance and auxiliary components in grams contains in one millilitress of medication.

Being in the department (regardless of which is therapeutic, surgical, cardiology, resuscitation), one way or another has to face injections (injections).

Procedural and DR nurses most often consume that word - a cube (2 cubes, 5, 10 cubes, etc.).

Medical "Cube" This is Millytr:

1 cube is 1 ml;

2 cubes are 2 ml;

5 cubes are 5 ml.

For example, make an analgin cube - to make an injection of 1 ml of analgin.

As for mg, it (Number B-BA) is determined by the percentage content of the substance in the ampoule / bottle.

5 cubic syringe how many ml?

report a violation

Answers

The word Cubes itself is a medical term. The syringe contains one milliliter in one cube. Therefore, in the syringe, two cubes contain two milliliters. In a syringe, three cubes contain three milliliters. In the syringe, four cubes contain four milliliters. And five cubes contain five milliliters. All other cubes in the syringe are considered similarly. The more cubes, the more milliliters in this syringe.

How many milliliters in the syringe 5

syringe on 5 cubes Paul C ()

Insulin syringe. Ask in Pharmacy Inna Sodilova ()

For 3 ml of solution it is more convenient to take 5 ml of syringes, there are divisions (on the syringe) - everything is signed 1.2, 3,4,5 - it is ml, you need to score so much through the needle so that the fluid run out at the time of 3 for the flow ( )

Usually 1ml \u003d drop. There is a special "sticks" ending round tip, usually such as dripping. Zaretskii kostya ()

1ml is 1 cubic fluid. If this liquid is water, then this \u003d 1gram.

How many milliliters in insulin syringe

The most affordable method of introducing insulin dependent from hormone diabetics is the use of special syringes. They are implemented complete with short sharp needles. It is important to understand what an insulin syringe is 1 ml, how to calculate the dosage. Patients with diabetes are forced to make injections on their own. They should be able to determine how much the hormone is needed, focusing on the situation.

Composition of drugs

To calculate insulin in the syringe, you need to know which solution is used. Previously, manufacturers made medicinal preparations with a hormone content of 40 units. On their packaging, you can find the labeling U-40. Now learned to make more concentrated insulin-containing fluids, in which 1 ml accounts for 100 units of hormone. The labeling U-100 is applied to such containers with a solution.

In each U-100, the dose of hormone will be 2.5 higher than in U-40.

To understand how many ml in an insulin syringe, you need to assess the mark on it. For injections, different devices are used, they are also the signs of U-40 or U-100. The calculations use the following formulas.

  1. U-40: 1 ml contains 40 units of insulin, it means 0.025 ml - 1 EI.
  2. U-100: 1 ml - 100 EI, it turns out, 0.1 ml - 10 EI, 0.2 ml - 20 EI.

To distinguish the tools conveniently in the color of the cap on the needle: with a smaller volume it is red (U-40), with a larger - orange.

The dosage of the hormone is selected by the doctor individually, taking into account the condition of the patient. But it is extremely significant to use the necessary means for injection. If you type a solution with a content of 40 EI in millilitress in the U-100 syringe, focusing on its scale, it turns out that diabetics will introduce 2.5 times less insulin into the body than it was planned.

Marking features

It should be sorted out how much the drug is required. Injection devices are available for injection devices with a capacity of 0.3 ml, the most common volume is 1 ml. Such an accurate dimension range is designed to have the ability to enter a strictly defined amount of insulin.

The volume of the injection should be focused on how much ML denotes one division of markup. Initially, the total capacity should be divided into the number of large pointers. So it turns out the volume of each of them. After that, you can calculate how many small divisions in one large, and calculate according to a similar algorithm.

It is necessary to take into account the not applied strips, but the gaps between them!

In some models, the value of each division is indicated. The u-100 syringe may contain 100 marks crushed with a dozen major. It is convenient to calculate the desired dosage. To administer 10 EI, it suffices to dial the solution to the figure 10 on the syringe, which will correspond to 0.1 ml.

U-40 usually have a scale from 0 to 40: each division is correlated with 1 insulin unit. To introduce 10 EI, you should also dial the solution to the figure 10. But here will be 0.25 ml instead of 0.1.

Separately, the amount should be calculated if the so-called "insulinka" is used. This is a syringe that contains not 1 cube solution, and 2 ml.

Calculation for another labeling

Usually, Diabetic has no time to walk along pharmacies and carefully select the necessary inventory for injections. Passing the term of the hormone administration can cause a sharp deterioration of well-being, in particularly difficult cases there is a risk of falling into anyone. If diabetics have a syringe at hand, intended for the introduction of a solution with another concentration, has to quickly recalculate.

If the patient is required to unitely introduce 20 EIs of the drug with the labeling U-40, and only the u-100 syringes are available, then not 0.5 ml of solution, and 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate it! You need to choose the same 20 EI.

How else use insulin syringes

ASD Fraction 2 is a well known to most diabetics. It is a biogenic stimulator that actively affects all metabolic processes passing in the body. The drug is produced in drops and is prescribed to insulin-dependent diabetics during type 2 disease.

ASD Fraction 2 helps reduce sugar concentration in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then syringe, if we are not about injections? The fact is that the liquid should not be contacted with air, otherwise the oxidation will occur. So that this does not happen, as well as for the accuracy of the reception, the syringes are used for the set.

Calculate how many drops of the ASD fraction 2 in "Insulinka": 1 division corresponds to 3 liquid particles. Typically, this amount is prescribed at the beginning of the drug, and then gradually increase.

Features of various models

Insulin syringes, equipped with removable needles, are on sale, and represent a one-piece design.

If the edge is soldered to the housing, the drug will be completely output. With non-removable needle, the so-called "dead zone", where part of the drug is lost. To achieve a complete removal of the medicine if the needle is removed, more difficult. The difference between the number of recruited and inaccurate hormone can reach up to 7 EI. Therefore, doctors advise diabetics to acquire syringes with non-removable needles.

Many use the injection device several times. Do it forbidden. But if there is no choice, then the needles are necessarily disinfected. This measure is extremely undesirable and permissible only if the syringe uses the same patient if it is impossible to apply the other.

Needles on "insulinks", regardless of the number of cubes in them shortened. The size is 8 or 12.7 mm. The release of smaller options is inappropriate, as some insulin bottle are equipped with thick traffic jams: you can simply not remove the medicine.

The needle thickness is determined by special labeling: the number G indicates near the letter G. It should be navigated when choosing. The thinner there is a needle, the less painful injection will be. Taking into account the fact that insulin is introduced several times daily, it is important.

What to pay attention to the execution of injections

Each insulin bottle can be used repeatedly. The remaining amount in the ampoule store should be strictly in the refrigerator. Before administration, the preparation is warmed to room temperature. To do this, take out the container from the cold and give to approximately half an hour.

If you have to use a syringe repeatedly, it must be sterilized after each injection to prevent infection.

If the needle is removable, then for a set of medication and its introduction, their different models should be used. It is more convenient to pick up insulin, and small and thin to make injections.

If you need to measure 400 units of hormone, then you can dial it in 10 syringes with the Marking U-40 or in 4 by U-100.

When choosing a suitable device for injection, it follows to:

  • The presence of a non-selected scale on the housing;
  • A small step between divisions;
  • Needle sharpness;
  • Hypoallergenicity of materials.

Inserting insulin follows a little more (for 1-2 EI), since some quantity can remain in the syringe itself. A hormone is accepted subcutaneously: for this purpose, the needle is introduced at an angle of 75 0 or 45 0. This level of tilt allows you to avoid moving into the muscle.

When diagnosing a diagnosis of insulin-dependent diabetes, the endocrinologist must explain the patient as and when the hormone must be introduced. If children become patients, then their parents paint the entire procedure. For a child, it is especially important to correctly calculate the dose of the hormone and deal with the rules of its administration, since a small amount of the drug is required, and it is impossible to allow it.

How many ml in Cuba Syringe

i discharged Sumamed, but I will not reach me how much to give it, there is a suspension of 100 mg / 5ml dosage to children: at the rate of 10mg / kg body weight 1 time a day, the child weighs 22 kg (5,5 years old) How many militers do I need to give a child? In the set of measuring syringe to 5 militers. The head does not consume: (. The topic was transferred to another conference, it is recommended to discuss it there! When writing a new topic, a big request to adhere to the subject of the conference.

Breeding medication for injection. Children's medicine

Breeding medication for injection. Medicine and Health

The child was appointed Ktetexin 10mg injections, in the vial, in the form of a powder, just as much as we need, and it is necessary to breed the medicine, so that it was not hurt. Novocaine - written on the packaging solution for injection of 5 mg / ml / 10 ampoules of 5 ml /, the doctor prescribed novocaine needs 0.5% -2.0, i.e. For breeding, I need to take novocaina just less than half an ampoule? Or am I wrong?

It is easier to buy a syringe 2.0 ml, according to the hatching exactly 2.0 ml

Can you get distracted from high and help me with a shallow household problem? :-)) Here I need to be, for example, to give the Malipus syrup in the amount of 20 drops 20 minutes before meals. And he consumes all food in the garden. Here's how I technically give him straight before the gate of the garden these 20 drops? Straight dripping on a spoon or there are other unknown ways for me? 🙂

Urgently. Children's medicine

what is "8 units in the insulin syringe" (we treat the animal)

what is written on the stripes?

How to drink bacteriophage?. Child from 1 to 3

Girls, help advice !! We found golden staphylococcus. Need to drink bacteriophage. But the problem is that we were last drank in infancy from the syringe, and now we are 3 years old and under any kind of daughter does not want to drink him (it is nasty taste and gadko smells). Pushed the bowl into her, so it broke out :-(. Than just not diluted, the smell remains. Tell me the method of receiving medicines. Och.

Who did the injections to the child, you a question. Child from 1 to 3

Advise pliz. Daughter 1 year and 3 months The injections were discharged intramuscularly, a 1.2 cube medication (I use 2 ml of syringe). Is it necessary to put another needle for it for intramuscular injections or can you close the one that is attached to the 2 ml-syringe? It is 7 mm long less than "intramuscular" from 5 ml syringe, but Mom says that it is necessary to use VM needles even for infants so that there were no cones (she said the pediatrician, in his time). The needle from 2 ml of the syringe is thinner and about 3.5 mm long. It is easier for me.

According to peptides, tell me pliz. SP: Sowdings

Tell me, please, who are in the subject))) how to mix them. There is a set of mimic wrinkles and moisturizing cream. I sit with them like a monkey with glasses. In the base, pour all the contents of the Ingi or to measure something you need to syringes? The leaflet with the instructions did not find. Heelp !! Shl. Peptides were collected here if that)))

Consider as an example of a recipe for serum against mimic wrinkles:

MATRIXYL SYNTHE'6 2%

Since we add only 6% of assets, thickener and preservative we do not need.

We take standard packaging in 50g or 20gr and calculate% input for each component

To find out the weight of assets for entering, we 50g / 20gr must multiply to the required% asset

If you have a pack of 20gr, then 0.2x4 \u003d 0.8gr

For Matrixyl: 0.5x2 \u003d 1gr (for 50g), 0.2x2 \u003d 0.4gr (for 20gr)

All components you can refuse the usual syringe from the pharmacy (they are sterile), after removing the needle. For each component, it is better to take a separate syringe.

Such cream is stored in the refrigerator for 6 months. Without risks loss of their properties, barbing or disruption of microbiological norms.

cedax. Child from 1 to 3

The probes from otitis 2 ml was discharged. Everything is in mg. This is a suspension. Question 1 mg \u003d 1 ml or not?

Help pliz, how much to "hang in grams" - medicine ..

i discharged Sumamed, but I will not reach me how much to give it, there is a suspension of 100 mg / 5ml dosage to children: at the rate of 10mg / kg body weight 1 time a day, the child weighs 22 kg (5,5 years old) How many militers do I need to give a child? In the set of measuring syringe to 5 militers. The head does not form: (.

It is probably so: 10mg * 22 \u003d 220mg, i.e. 11ml.

It turns out, 2 dimensional syringe and another 1ml.

How to give a child a medicine: 5 rules. Child health up to year

More children's drugs are often produced in the form of rectal candles, and in order to introduce them, a certain skill will be required, but this procedure is completely uncomplicated for moms and dads. What, how much and how often before giving a child a medicine, carefully examine the instructions for its use. Read what should be the appearance of the drug, its consistency, and be sure to check the shelf life of the drug. Pay attention to the storage conditions of the drug: some medications need to be stored at a certain temperature, without access light or even in the refrigerator. In advance, ask the doctor in advance, in which dosage and how much r.

It is impossible to independently reduce or increase the dosage of the drug or finish the course of treatment earlier than the doctor recommended. Memore correctly never let the medicine on the eyes. If a special dimensional spoon or dispenser is applied to the drug (it is usually produced in the form of a measuring syringe with divisions), it is better to measure the medicine, and not by conventional cutlery (tea or dessert spoon). It is more convenient (dispenser is easier to dial a bottle medicine), and there is no risk to make a mistake with the dosage. Use that measuring device that comes complete with this medicine: you should not take a dispenser from another drug, even if you think it seems to you that he is nothing about.

Questions about epics to Ukrainians and not only. Other children

I have a lot of questions, there is little time, so I throw off everything into one topic. We are now with Manyune in the hospital. They fell with a series of seizures of strong, on Thursday were already being discharged and here as charged: (in general, the horror is simple. We drink Depakin Syrup 3 cubes (measuring the syringe) and now added more Lamycal one hundred and twice a day. Dose to increase Will be. And with a small worse: (Yesterday, our doctor spoke with me. They suspected that we are not just epilepsy, but caused by a genetic violation, in.

We have no genetics also seen all sorts of genet. Symptoms - what they just were not suspected, and "happy doll syndrome" because of the beautiful face and long eyelashes, and we are really gothic, and we are really gothic :)))

But neither a karetype, no amino acid analysis showed anything :))

How to pour perfumes?. SP: Sowdings

Girls, I remember was the purchase of lots from us. And how did you pour them on the bottles? It is necessary to divide perfume very much))) And yet, where to buy empty bottles? thank

i really turn off the final - to pour everything

Poll about Cortexin. Other children

I looked asked in the search, I read something, but I still want to make a separate topic. Girls who are colole to children with their cortecin? It is advisable to write on ninks 🙂 questions such: 1. Dosage and frequency. How many days are the course, in a day or every day of the prick? 2. What bought? Novocaine or Piz. 3. How did children transfer the injection himself? Is he painful? 4. Diagnosis of a child. 5. Results (positive) after the course, if you were - what? 6. Side effects, deterioration - if so, what?

help plz calculate the dosage of medication. Pets

for my dog, 3 kg. It is necessary to add kocarboxylase to the dropper in the dosage of 0.02. It is for sale in a dosage of 50 mg. Neither the doctor nor the pharmacists in the pharmacy could really say to me how as a result get 0.02. In the packaging of the ampoule with the powder of 50 mg of cocarboxylase and ampoules with water for injection of 2 mg. I asked in the pharmacy whether I need to take 5 ml of spires. No ridges, it is necessary 2 ml. I read in the instructions - it is written there in 5 ml syringe. But it is FIG with it, buy. How to measure 0.02? For some reason I was told that.

5 milligrams - is it how much?. Child from 1 to 3

Girls who know 5 milligrams - how much will it be - a teaspoon or less? And then the doctor prescribed a medicine, and it is written there - a one-time dose - 5 milligrams.

How much is a PIRANTER for prevention? Children's medicine

I bought a pyrantel-suspension child. I did not understand anything from the instruction. Ascaridosis and enterobiosis. Mixed invasions once in a dose of 10 mg per kg. Next, there is a table (unnecessary removal, child 3 years) Age of the dose of the drug Quantity in 2 years - 6 years 250 mg 1Mer \u003d 5ml Ankylostomyomy: prescribed in a dose at the rate of 10 mg per kg for three days, noncatorosis: during severe forms are prescribed at a dose at the rate basis 20 mg per kg for three weeks. I do not understand how to give a child for prevention (it seems to me that.

It is necessary to give it once. Pyranthel's drinks must have all family members at the same time. The adult dose is also determined by 10mg per kg, or if approximately adults are up to 75 kg - it is necessary to 15ml Pyrantel, i.e. 3 measurements.

Spend at home cleaning. Change linen.

To make it easier for itching, fit the child, lubricate with children's cream at least. If you suspect that the child has an increment, then this is no longer prevention, but treatment. If there are no worms, then the drug does not act on the missing worms, i.e. He will not warn the appearance of worms.

I just explained the dose, it's not advice to take or not take the drug - it should be your decision.

Rectors: In which cases it is necessary to additionally register a child

After some time, a wolf appetite can attack him, and he will eat much more. The toddler's stomach was accustomed to the small volume of milk, so more than a meal will fit in it, a few days will pass. Dimensional feeding from the bottle gives the baby the opportunity to stop there when he was saturated. For a week you will understand how much detectors need a baby at different times of the day. Offer at first doctors, then the chest. Some children are better sucking the chest on a full stomach. If the baby badly gained weight, he needs not just to grow, but also catch up. For accelerated growth, more food is needed, so it is not surprising that first the baby eats so much. The rapid growth at this time will be noticeable along the sharp curve.

Adaptations for the chest kid detector Presentation Method Pluses Minuses Comment Spoon Easy and fast way for a small amount of detector. Laborious and uncomfortable for a large amount of detector. A good way for a pose of a pose. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for the chest) light and fast method for a small amount of detector. Working for a large amount of detector. Put the baby on your knees so that his head is raised. Put your feet on the coffee table, etc. During the doctor, let the baby suck the finger. Watch that the tip of the syringe or pipette is not stuck in the sky or the cheek of the baby. Small

Cum: wrestling for quality. Analyzes and surveys before.

The quantity and quality is the first, which is defined in the laboratory, is the time of the fusion of the ejaculate. Initially, the sperm is absolutely liquid, then quickly thickens, and after some time under the action of prostate enzymes again becomes liquid. The correctness of the transformations can be judged by viscosity change. For this, the ejaculate is gained in syringe and released through a special needle. Viscosity is measured along the length of the "thread", which stretches for the released drop. The sperm is considered to be discharged if the "thread" does not exceed 2 cm. Normally occurs in 10-40 minutes. If the process is delayed, then? There are problems with prostate gland. After the discharge using the indicator paper, cum is tested for acidity. WHO Recommended.

30 drops how much in milliliters?. About her, about maiden

My husband, at my request, bought in the production department of the pharmacy Drop Morozov in the production department (those that help sleep), so these goats (I can not call otherwise) they are packaged now in ordinary bottles that do not allow dripping through the lid. Here's how you want, so death 30 drops: ((at least warned, he would have taken a pipette. There is an idea to celebrate the syringe, but I can not find the volume of drops.

Young mother, or first days in the maternity hospital. Establishing chest.

Determined the norm in 40 g for each feeding, they said to wake and feed any every 2 hours, counting from the start of feeding. The bottle was urgently purchased, and I began to join. But now, from the fact that the collapse began to replace the milk and the breasts have been crowded on the 4th day, I started stagnation. From his swelling as 2 pillows of the bust, I could not pass the bigger, how much I neither milane. I didn't help even the hospital electric milk pump, which buzzed at full capacity, but squeezed only a couple of drops. Dreaming to me by this moment the mechanical was already at home, and it was not possible to pick it up. If I could not get milk, then what was the same to do this to my weakened daughter! One of the weighing, for example, display.

You are well done that they fought. Husband is gold. I wish you all the joys more.

I am mom in Cuba! Multiple pregnancy

Mom in Cuba: The real story of an ordinary woman who has safely endured and gave birth to a trip, while retaining the excellent sense of humor.

And now - one yell, the second sleeps, the third crushed. Who to run, what should I do? I'm in the hospital. One with three lying in the ward. Thanks to the hospital, I learned to at least swearing there. The seam hurts, the head is spinning, and you need to wash the floors not only in your ward, but also in the common kitchen, running with three procedural and in doctors, who are sitting on different floors, take and get diapers, keep a diary when who, who And how much it was and described, collecting urine, wearing every day kids on the control weighing and the most after each feeding them. I have no second to sleep. At night, the worst thing begins. The kids hurt the tummy, and they are in a choir. "It will go to three months. Or maybe not to go to three, "the nurse's duty dismissed and slowly deleted. I'm going crazy. Ambassador

Artificial feeding. Artificial feeding

How to correctly calculate the desired volume of the mixture? With artificial feeding, it is important to determine the necessary amount of child's nutrition. The daily amount of food depending on the age of the baby is given in Table 1. For example, if the kid is 1 month and its mass of 3500 g, then the daily power supply is 1/5 body weight, i.e. 700 ml. To determine how much mixture is needed into one feeding, divide the daily meal for feedings. An approximate amount of feeding during the day: the first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if with breasts

Parental needlework. Part 2. Care for the child up to the year

How to care and treat baby at home.

Moreover, if the drops are placed in a sterile bottle, then we get the opportunity not to disturb its tightness: we wipe the rubber cork with alcohol, piercing the needle and score into the syringe. The needle takes out from the bottle and disconnect from the syringe. As a result we have a container with sterile mortar. The container that does not differ and is not broken, which is convenient to warm and conveniently apply. The nose in order for the drug to make an action, the nose is preliminarily cleaned, of course, if there is a cluster of mucus in the nasal strokes. Children of the conscious age will be fulfilled.

No much. How much can accumulate waters?

Major and multi-way during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, in 10 weeks of pregnancy, the amount of amniotic fluid is an average of 30 ml, a shame is about 100 ml, in 18 weeks, etc. The maximum volume is noted by ky of the week of pregnancy, on average module ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of an increased removal of a liquid from the body of a woman. The accumulative water performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, protect the umbilical cord from the compression between the fetus body and the walls of the uterus. Thus, the volume of accumulating waters is a kind of indicator of the normal course of pregnancy. What.

Look! I myself looked for a long time, but then found on this site.

The fact that the doctor prescribed. We give a medicine to the infant.

It is unacceptable to use drugs with an expired shelf life, incorrectly stored, with traces of damage, with an erased and unintelligible inscription. Rule Third: Observe the dose-appointed dose, time, method of receiving, multiplicity and duration of the use of medication. Before the doctor's care, you specify whether you understood the dosage scheme: how much, how, when (before, during or after eating), how often and how long the child should take medicine. Never give a medicine "to the eye" - measure the prescribed dose with the help of a special dimensional spoon, pipettes with divisions, a measuring tube or a syringe without a needle; Before you give a medicine to the child, check if you measure the dose. Use only pure measuring dishes. Reception of drugs must be regulated.

If such a need is still there, then divide the tablet very precisely sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, it is necessary to give a 1/8 tablet to the child: type in the syringe exactly 8 ml of boiled water, release into a cup, then grind a whole tablet and dissolve it there, then dial only 1 ml of solution into the syringe from the cup and let the baby drink. The solution prepared from the exhaust tablet can only be used immediately after its preparation - it is not subject to storage and is used once; For the next dose of the drug, the solution is reproduced.

Few milk? It is worth understanding! Part 1. Establishing the chest.

The use of substitutes of the mother breast: pacifier or bottles with a nipple. There is a simple rule: "Sucking nipples - minus feeding (minus breast stimulation for sufficient lactation and minus some kind of milk for a child)". Doping baby with water and / or other liquids. Obviously, how much baby swept, he did not eat mom's milk as much. Water fills the tiny stomach, gives a false sense of saturation. It is known that simple water (not the one that is contained in maternal milk) is not assisted by a child, i.e. There is no relation to the prevention or treatment of dehydration, but only passes through the gastrointestinal crumbs, while leaning the flora, which "helps to make up" breast milk.

Kogitum - Open ampoules can be stored?. Other children

Assigned Kogitum, 1/4 ampoules 2 times a day. Given the price of the drug, I would like to use an ampoule at least for a day, and even better - for two. Can I store it open, no one specified? thank

Mom makes injections - need help. Your experience and knowledge is needed.

Who has experience in this business? Your help is needed, And then my brains now boil 🙁 I appointed a child a course of treatment, I discharged a bunch of drugs, incl. You need to make injections: 1. Celebricsin 1,0ml intramuscularly 2.Akthegin 2,0ml intramuscularly 3.Newsidin 5mg 0,5ml intramuscularly injections to do mom, i.e. I myself. I'm terribly afraid, while in life, no ships itself did. The experience is only in the breeding injection of Cortexin and, accordingly, I saw where to prick and how to enter. Those. from.

Please transfer drops to ml. SP: Sowdings

It is necessary to give a child 10 drops of medicine, and there are no pipettes :-( There are a syringe. Who is not too lazy, please reflect how many ml give.

The child refused his chest. Part I. Breast Refusal

Over time, with regular feeding, the nipple acquires a normal appearance. If it does not work, feed with feeding overlays. You can try to pull the nipple. True, it was better to start studying before childbirth. Make a simple mechanism: a one-time syringe 5 ml is removed the piston, cut off the knife that part of the syringe, where the needle is inserted, so that the tube is inserted. Insert the piston in the cut end. With a free end (where the streams for the fingers) apply to the nipple and pull the piston so that the nipple dragged inside the syringe. Leave for a while. With regular classes, the nipple will stretch. Different breasts cause. One breast suck is easy, and another for some reason is complex.

©, 7Y.Ru, certificate of registration of media email number FS.

Reprinting messages from conferences is prohibited without specifying a link to the site and authors of the messages themselves. Reprinting materials from other sections of the site prohibited without the written consent of the company Alp Media and authors. The edition of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing is carried out by KT-Alp.

7Ya.ru - information project on family issues: pregnancy and childbirth, education of children, education and career, home economy, rest, beauty and health, family relationships. The site employs thematic conferences, blogs, ratings of kindergartens and schools are conducted, articles are published daily and contests are held.

If you find mistakes on the page, problems, inaccuracies, please let us know. Thank!

The most affordable method of introducing insulin dependent from hormone diabetics is the use of special syringes. They are implemented complete with short sharp needles. It is important to understand what an insulin syringe is 1 ml, how to calculate the dosage. Patients with diabetes are forced to make injections on their own. They should be able to determine how much the hormone is needed, focusing on the situation.

Composition of drugs

To calculate insulin in the syringe, you need to know which solution is used. Previously, manufacturers made medicinal preparations with a hormone content of 40 units. On their packaging, you can find the labeling U-40. Now learned to make more concentrated insulin-containing fluids, in which 1 ml accounts for 100 units of hormone. The labeling U-100 is applied to such containers with a solution.

In each U-100, the dose of hormone will be 2.5 higher than in U-40.

To understand how many ml in an insulin syringe, you need to assess the mark on it. For injections, different devices are used, they are also the signs of U-40 or U-100. The calculations use the following formulas.

  1. U-40: 1 ml contains 40 units of insulin, it means 0.025 ml - 1 EI.
  2. U-100: 1 ml - 100 EI, it turns out, 0.1 ml - 10 EI, 0.2 ml - 20 EI.

To distinguish the tools conveniently in the color of the cap on the needle: with a smaller volume it is red (U-40), with a larger - orange.

The dosage of the hormone is selected by the doctor individually, taking into account the condition of the patient. But it is extremely significant to use the necessary means for injection. If you type a solution with a content of 40 EI in millilitress in the U-100 syringe, focusing on its scale, it turns out that diabetics will introduce 2.5 times less insulin into the body than it was planned.

Marking features

It should be sorted out how much the drug is required. Injection devices are available for injection devices with a capacity of 0.3 ml, the most common volume is 1 ml. Such an accurate dimension range is designed to have the ability to enter a strictly defined amount of insulin.

The volume of the injection should be focused on how much ML denotes one division of markup. Initially, the total capacity should be divided into the number of large pointers. So it turns out the volume of each of them. After that, you can calculate how many small divisions in one large, and calculate according to a similar algorithm.

It is necessary to take into account the not applied strips, but the gaps between them!

In some models, the value of each division is indicated. The u-100 syringe may contain 100 marks crushed with a dozen major. It is convenient to calculate the desired dosage. To administer 10 EI, it suffices to dial the solution to the figure 10 on the syringe, which will correspond to 0.1 ml.

U-40 usually have a scale from 0 to 40: each division is correlated with 1 insulin unit. To introduce 10 EI, you should also dial the solution to the figure 10. But here will be 0.25 ml instead of 0.1.

Separately, the amount should be calculated if the so-called "insulinka" is used. This is a syringe that contains not 1 cube solution, and 2 ml.

Calculation for another labeling

Usually, Diabetic has no time to walk along pharmacies and carefully select the necessary inventory for injections. Passing the term of the hormone administration can cause a sharp deterioration of well-being, in particularly difficult cases there is a risk of falling into anyone. If diabetics have a syringe at hand, intended for the introduction of a solution with another concentration, has to quickly recalculate.

If the patient is required to unitely introduce 20 EIs of the drug with the labeling U-40, and only the u-100 syringes are available, then not 0.5 ml of solution, and 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate it! You need to choose the same 20 EI.

How else use insulin syringes

ASD Fraction 2 is a well known to most diabetics. It is a biogenic stimulator that actively affects all metabolic processes passing in the body. The drug is produced in drops and is prescribed to insulin-dependent diabetics during type 2 disease.

ASD Fraction 2 helps reduce sugar concentration in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then syringe, if we are not about injections? The fact is that the liquid should not be contacted with air, otherwise the oxidation will occur. So that this does not happen, as well as for the accuracy of the reception, the syringes are used for the set.

Calculate how many drops of the ASD fraction 2 in "Insulinka": 1 division corresponds to 3 liquid particles. Typically, this amount is prescribed at the beginning of the drug, and then gradually increase.

Features of various models

Insulin syringes, equipped with removable needles, are on sale, and represent a one-piece design.

If the edge is soldered to the housing, the drug will be completely output. With non-removable needle, the so-called "dead zone", where part of the drug is lost. To achieve a complete removal of the medicine if the needle is removed, more difficult. The difference between the number of recruited and inaccurate hormone can reach up to 7 EI. Therefore, doctors advise diabetics to acquire syringes with non-removable needles.

Many use the injection device several times. Do it forbidden. But if there is no choice, then the needles are necessarily disinfected. This measure is extremely undesirable and permissible only if the syringe uses the same patient if it is impossible to apply the other.

Needles on "insulinks", regardless of the number of cubes in them shortened. The size is 8 or 12.7 mm. The release of smaller options is inappropriate, as some insulin bottle are equipped with thick traffic jams: you can simply not remove the medicine.

The needle thickness is determined by special labeling: the number G indicates near the letter G. It should be navigated when choosing. The thinner there is a needle, the less painful injection will be. Taking into account the fact that insulin is introduced several times daily, it is important.

What to pay attention to the execution of injections

Each insulin bottle can be used repeatedly. The remaining amount in the ampoule store should be strictly in the refrigerator. Before administration, the preparation is warmed to room temperature. To do this, take out the container from the cold and give to approximately half an hour.

If you have to use a syringe repeatedly, it must be sterilized after each injection to prevent infection.

If the needle is removable, then for a set of medication and its introduction, their different models should be used. It is more convenient to pick up insulin, and small and thin to make injections.

If you need to measure 400 units of hormone, then you can dial it in 10 syringes with the Marking U-40 or in 4 by U-100.

When choosing a suitable device for injection, it follows to:

  • The presence of a non-selected scale on the housing;
  • A small step between divisions;
  • Needle sharpness;
  • Hypoallergenicity of materials.

Inserting insulin follows a little more (for 1-2 EI), since some quantity can remain in the syringe itself. A hormone is accepted subcutaneously: for this purpose, the needle is introduced at an angle of 75 0 or 45 0. This level of tilt allows you to avoid moving into the muscle.

When diagnosing a diagnosis of insulin-dependent diabetes, the endocrinologist must explain the patient as and when the hormone must be introduced. If children become patients, then their parents paint the entire procedure. For a child, it is especially important to correctly calculate the dose of the hormone and deal with the rules of its administration, since a small amount of the drug is required, and it is impossible to allow it.

How many drops are included in 1 cube syringe?

Very often you can face the situation when it is necessary to pour a certain number of drops, and there is no dispenser or no pipette.

Usually in this case, the syringe is used, since the Internet is fully information that one drop is 0.05 grams, and in one millilitress 20 drops. But using such a counting of drops is easy to fall in a mistake and pour a much larger amount of drops than required. After all, the volume of drops depends on the viscosity of the fluid. For example, if the water drop is indeed approximately 0.05 grams, then the drop of tincture Valerians already weighs 0.02 grams and therefore in one cube there are not 20 such drops, but 50. But for example, Ambroben is noted in one cube only 15 drops. So it is better to use the dispenser.

What is a cube? This is 1 milliliter.

What is a drop of water? This is one fiftieth part of millilita (1/50).

So in 1 cube 20 drops of water. Everything seems to be simply and understandable, but some solutions (alcohol tinctures, growth stimulants for plants, aromatic additives to electronic cigarettes, etc.) have the volume of droplets completely different.

Such a concept as a "cube" means 1 cubic meter. See 1 cube of the syringe contains 1 milliliter.

The number of milliliters contained in the syringe can be different. For example: 5 ml., 10 ml., 20 ml. etc.

To determine how many drops in 1 cube syringe, you need to remember how many drops are contained in 1 ml.

This amount will be different depending on the tightness of the substance (liquid).

If you take 1 milliliter of water, then it contains 20 drops.

Accordingly, in 1 cube syringe there will be 20 drops of water.

In 1 ml. Other substances will be contained, as a rule, more drops than in water - respectively, in 1 cube syringe will also fit a much larger amount of drops.

1 ml. Ether - about 60 drops.

1 ml. Alcohol is about 40 drops.

It depends on what you will drop, and what exactly drip. If you drip directly from the syringe, it depends on the diameter of the needle that you insert into the syringe, and how at the same time you will have a needle: vertically, or horizontally, as well as from the temperature that you will drip.

Since manufacturers of drugs that are measured by drops do not indicate how much ml in one drop of this substance, then it is quite problematic in one drop in one cube of the syringe. If based on general information, then:

  • 1 ml of aqueous solution - 20 drops;
  • 1 ml of alcohol solution - 40 drops.

For example, the saline in 1 ml will be approximately as much as water: 20 drops. But iodine 5 percent has a volume of one potassium 0.02 ml and in 1 cube it will be as many as 50 drops.

The concept of "cube" is used in medicine and means almost always 1 ml of any kind of medicinal product.

So, the doctor can say a nurse "to make 2 analgin cubes and a diploma cube", which means 1 ml of diploma + 2 ml of analgin.

Droplets in 1 cube - 1 ml of about 20 drops of water (saline);

The number of droplets in a cube of other solutions may differ.

How many ASD drops in 1 ml of the syringe?

Hello! Interested in the next question - how many ASD drops in 1 millilitra syringe? Are there any differences in the amount of drops in one cube if used, for example, 2 or 3 fraction?

What kind of syringe is best suited and will be more practical: is a big or small insulin? Thank.

The size of the drop depends on the diameter of the drip, viscosity and strength of the fluid. In one millilitress (cube) from 35 to 40 drops of ASD-2. The syringe (any) is better to measure the liquid in milliliters, and the drops are more convenient and more accurate to count the pipette.

Male and reproductive health

Having gained 1 ml into an insulin syringe in an insulin syringe, gut its contents carefully, counting with all this number of drops. For such purposes, insulin syringe is always prepared in my first aid kit. I remove the needle from him and recruit one cube medication that you want to pour. In this case, it will be difficult to measure exactly 30 drops of a particular medicine using a syringe or a teaspoon, in which it is known to fit 5 milliliters of water and therefore 100 drops.

Typically, the question of how many drops of 1 ml appears in those who have appointed to accept a certain treatment facility in milliliters, with all this in the package there is no respective dispenser. If a pharmaceutical dose is more than 5 ml, it is more convenient to use a syringe for its consumption, but cutlery. Good day! Many people write that they drink ASD-2 drops, and how to get them from the bottle, in the syringe division in ml. How to take, for example, 5 drops, tell me. You can use the straw tube, dial the medicine into it and holds the tip gently drip into the glass count of the drug. I need to refuse the medicine drops, but so as not to open the bottle and there was no contact of the drug with air. Option is the second, more durable- dip your finger in the drops and consider how much drops with it in a spoon. But this is a funny method that is better not to use it, it is inconvenient.

I also added a dose of 1 cube. And they went (it's hard to breathe hard, fatigue fast), but just reveal the dose to softer the whole nastyness. In the last 2 days of reception, the head was very sick and went to hurt the teeth, in which there are no nerves. I think that with a dose overwhelmed. Today, the fifth day to drink finishing, the head does not hurt, but there is some kind of severity. The dosage will still be reduced. Sasha, and the head hurts? I have a hurt from a big dose, but unfortunately, at that moment I did not guessed to measure pressure. The head and teeth stopped rooting from a reduced dose. The third week I will drink 3 divisions.

Tomorrow I probably buy another syringe, so that it was clear, otherwise I mercate everything! But the book must still read! Sasha, you must probably read the book too. I think I moved away with a dose, so today I started the second five days of 7 drops in the morning, I drink water, although I used to make myself. Today I first began to give 3 drops and I think it may not have time. Maybe you need to give more? Just a lot about what they ask, there are already answers, you just need to read from the 1st review and, by the way, learn a lot of interesting and useful from the Soviets. Who knows wait and it will decrease or pull out how doctors advise. But they are otherwise they do not belong to him. Forces at the husband added after two days of admission of ASD, but he began to sneak at night, liquid is probably added there. Another forum read today, again 50/50 opinions. But in any case, to increase the dose without knowledge risky, injector, maybe in the post. Day five days. But after all, the spoons are also different, there is no accurate standard for them, some more closest, other smaller. If you are not lazy, and you read all the reviews previous ones, it was discussed there.

How many ASD drops in 1 cube syringe

and much more about how to lead a call

ASD-2 fraction

  • < Назад
  • Forward\u003e
  • Page 17 of 21

While you are waiting for the operation, you should not waste time, be treated by E. Lebedev, take Todikovp, Cleaner, Boligols, do not miss the expensive time, diet, cleaning is the main thing, the operation must be done, and chemistry and irradiation - in no case. My sister cured breast cancer Todikrap, for several years she is not bothering her. Have questions, write:

I also do not know how the ADD-2 is produced, and the composition, etc. But a glimpse of the information that the production of ASD-2 was something like a triggering. And this means that carcinogens are present. It is in this sense that ASD-2 is considered poison. I did not rechecked this on credibility. But I think she is a pair of clicks from each of us - easily accessible.

What is carcinogens, this is a separate topic.

Everywhere we are talking about drops, but to pick up a syringe, how many cubes, if you start taking from 10 drops - how much will it be cubes in the syringe?

I apologize, if the question seems stupid)) Please answer me!

thank you for the answer! For the prevention, I was going to take my son, and I still doubt (at my own expense), another question arose. I read here that it is considered the ASD thickens blood. I have chronic thrombophlebitis of deep veins of the lower extremities, varicose veins. Protombain index within the normal range, but maximum. After consulting, Professor-Flebologa accepts phenylin (for blood liquefaction) for a long time. I am 54 years old. Can ASD help with this problem (varicose veins, thrombophlebitis), will not be worse if it really thickens blood. I mean exactly 2 fractions (for intake)

How many drops of ASD 2 in 1 cube syringe

Please, please, how many drops of the 2nd fraction in one cubicle of the syringe (in 1 millilitress)?

The size of the drops depends on the diameter of the hole of the drip, which you will measure, as well as the properties of the liquid. In a standard drip 1ml (cube) of water - 20 drops. ASD is an approximate, but this is again the same, not exactly, and approximately. In your case, there is only one way to learn exactly - to count on your own.

All rights reserved. Copying material is possible only

Comments

I refused to drink the first day, then did not give me a juicy feed, you had drunk to drink, two days later they drank (cube of the drug on a liter of water for drinking them). Surveys have fun, if you can say so in the outcome of the winter, females have fallen safely, all milk and The nests did. The average began to actively run after females, was the old male 7 years, Sedina slept, rejected.

People and not so fat drink. I will not list.

Subitivity sensations after taking the drug.

The joints are as lubricated, the feeling of youth, the skin is smoothed out of wrinkles, I want to clean up, took the decade Hollyzim, Alllohol, - was gastritis (there was no problem, there is no gastric problems)

I noticed when a stable weight loss took place, I had 1 kg per day, minus 7 kg per week, appetite to meals moderate.

Man young on his eyes, abrasions heal fast

If anyone wants to try to feel youth or a couple of dozen years, you can try to try with ASD 2. Back to youth for a month.

No need to hide such a drug from people, it replaces many other medicines and tablets, gives a tip about proper nutrition.

In men, sexual function normalizes, it is written on all forums about the drug, I do about rabbits.

I think in every home, he must be at hand just in case.

An excellent drug at an affordable price is not an advertisement, but a personal conclusion.

10 drops of ASD2 how much will be in the insulin syringe syringe to 100

Googled How much 10 drops of ASD2 in milliliters. In insulin syringe, usually 1 ml, independently what scale. 40 units or 100. There are also 2 scales at the same time, in units and milliliters. Well, recalculate.

From the Internet, I did not check (!) - "In 1 ml of insulin syringe contains 30 drops of ASD-2"

So 10 drops are approximately 0.33ml. Then in the insulin syringe per 100th (per hundred, not at forty), you need to gain 33 divisions, units.

For confidence, nevertheless, it is necessary to pour once right into the syringe, removing the piston and then use this marker without fears.

Wall entry

1 cubic centimeter (or in spacious - cube) \u003d 1 ml. In one millilitress, 30 drops of ASD-2. Water will be greater, as water density is less.

In half a cube, respectively, 15 drops.

Very convenient to recruit ASD 3-cubic syringe.

In a cube 10 divisions. Each division is 3 drops. Polkubika 5 divisions and 15 drops.

Even those who first accept ASD-2 can be started with 3 drops.

I give my cats so even cats, and their weight is much less than the human.

Increase the dose of ADD-2 is gradually. For example, spend the first five days on 3 drops, take a break of 3 days. The next five-day take 3 drops twice a day. Watch out well-being. If everything is in order, the next five days take 3 drops 3 times a day. That is, the dosage varies due to an increase in the frequency of reception, and not an increase in the dose, as such.

This is for beginners receiving ASD-2.

The maximum dosage is calculated as follows. Two kilograms of weight takes 0.1 ml of ASD-2.

That is, if a person weighs 80 kg, the maximum dosage will be 4 cubes.

But, everything, again, is very individual. It all depends on the complexity of the disease, the individual perception of ASD-2 and other reasons.

the reactions of all cats on the ASD-2 are different. From short care, to flips with turns in the air. Give strictly to meals, otherwise it will break out.

1 ml - 20 drops

5 ml - 1 teaspoon - 100 drops

10 ml - 2 teaspoons - 200 drops

15 ml - 1 tablespoon - 300 drops

30 ml - 1 oz - 2 tablespoons - 600 drops

240 ml - 1 cup - 16 tablespoons - 3600 drops

Look in the network the method of treatment of ostelitis with ASD-2. There are reviews.

There is no difference where infection is in the berth or bone of the jaw.

It could be used in conjunction with other drugs. And the real boom appeared around the road fraction. Thanks to the efforts of his creator, a fabric therapy laboratory was built in Moscow.

However, the attempts of the road in the years to obtain the official permit for the use of ACS did not lead to it. Moreover, he was dismissed from his position, headed by the laboratory closed, and Alexey Vlasovich Dorogov died under mysterious circumstances.

Since then, for more than 40 years, the preparation of the ASD faction is quiet exist. It is not advertised, but also do not prohibit. Many doctors did not even hear about him. Many applications of ADD-2 and ASD-3 are lost.

The drug could have been done in the summer, if there were no efforts of Olga Alekseevna, daughters roads as well as Professor N.N. Aleutsky from Arkhangelsk, healer V. V. Tishchenko from Simferopol and an oncologist's doctor of St. Korepanova from Barnaul. Having created each methodology, they saved and saved with ASD thousands of cancer. In his book, "Panacea from cancer, infarction, AIDS" Tamara Yakovlevna Svischev regrets that official medicine has not yet recognized the faction. It is sold only in veterinary pharmacies and is intended for the treatment of animals. To the great regret, the instruction is not attached to it, how to take. Therefore, it is very difficult to engage in self-medication.

The antiseptic-stimulator road has an antibacterial action, strengthens the immune system, accelerates the system of regeneration of damaged tissues. There are a fraction 2 (for internal use) and fraction 3 (for outdoor use).

ASD-2 is used with all female diseases, including frigidity, infertility, relocifers drug addiction, treats the "second heart" of men, from prostatitis, helps with impotence, psoriasis, tuberculosis, arthrosis, sclerosis, infarction, stroke, cardiovascular pathologies, For ulcers, gastritis, colitis, melted invasions, bacteriosis, with kidney disease (jade, pyelonephritis), liver disease, restores the destroyed tissues, helps with periodontal and angina.

Especially good results were obtained when dying the vagina with a solution of ASD-2: because it not only destroys Trichomonas and chlamydia, but also removes fibromu, mioma, erosion, cancer and cervical cervix, contributes to the birth of healthy children. It is after effective getting rid of trichomonodes in women and began, then in the 50s, a mass, but informal use of ASD-2.

I would like to introduce readers with a scheme of intensive complex getting rid of cancer proposed by prof. N.N. Aleutsky, he agrees with the Austrian healer R. Brois in the fact that the first thing you need to remove from the apartment of the camphor, naphthalene, various aerosols and chemical drugs to combat cockroaches, mice, mole, mosquitoes, ants, etc.

Next, the oncological patient needs to undergo a course of treatment by the Boligol according to the "Tsarist" technique V. Tyshenko. Be sure to take the infusion of sage and tea prepared by R. Brois. (G.G. - see Tom II Book "Healers of Russia from our house.")

And take the preparation of ASD-2 for one of the schemes proposed by prof. N.N. Aleutsky. Do not open the bottle (pick up the syringe), store on the table in the freezer.

1st option (gentle): 1 drop of drug dilute in 50 ml of warm boiled water, drink and put the influence of the souls (1 tsp. Herbs on a glass of steep boiling water, insist 40 minutes). Enough ¼ cup infusion on reception. By increasing, bring the number of droplets of ASD-2 to receive up to 5 and further take therapeutic agent 4 times a day 5 drops before meals. Course for 25 days. Then 10 days break, and these days metronidazole (trichopol) is 1 tablet 3 times a day.

How many milliliters in insulin syringe

The most affordable method of introducing insulin dependent from hormone diabetics is the use of special syringes. They are implemented complete with short sharp needles. It is important to understand what an insulin syringe is 1 ml, how to calculate the dosage. Patients with diabetes are forced to make injections on their own. They should be able to determine how much the hormone is needed, focusing on the situation.

Composition of drugs

To calculate insulin in the syringe, you need to know which solution is used. Previously, manufacturers made medicinal preparations with a hormone content of 40 units. On their packaging, you can find the labeling U-40. Now learned to make more concentrated insulin-containing fluids, in which 1 ml accounts for 100 units of hormone. The labeling U-100 is applied to such containers with a solution.

In each U-100, the dose of hormone will be 2.5 higher than in U-40.

To understand how many ml in an insulin syringe, you need to assess the mark on it. For injections, different devices are used, they are also the signs of U-40 or U-100. The calculations use the following formulas.

  1. U-40: 1 ml contains 40 units of insulin, it means 0.025 ml - 1 EI.
  2. U-100: 1 ml - 100 EI, it turns out, 0.1 ml - 10 EI, 0.2 ml - 20 EI.

To distinguish the tools conveniently in the color of the cap on the needle: with a smaller volume it is red (U-40), with a larger - orange.

The dosage of the hormone is selected by the doctor individually, taking into account the condition of the patient. But it is extremely significant to use the necessary means for injection. If you type a solution with a content of 40 EI in millilitress in the U-100 syringe, focusing on its scale, it turns out that diabetics will introduce 2.5 times less insulin into the body than it was planned.

Marking features

It should be sorted out how much the drug is required. Injection devices are available for injection devices with a capacity of 0.3 ml, the most common volume is 1 ml. Such an accurate dimension range is designed to have the ability to enter a strictly defined amount of insulin.

The volume of the injection should be focused on how much ML denotes one division of markup. Initially, the total capacity should be divided into the number of large pointers. So it turns out the volume of each of them. After that, you can calculate how many small divisions in one large, and calculate according to a similar algorithm.

It is necessary to take into account the not applied strips, but the gaps between them!

In some models, the value of each division is indicated. The u-100 syringe may contain 100 marks crushed with a dozen major. It is convenient to calculate the desired dosage. To administer 10 EI, it suffices to dial the solution to the figure 10 on the syringe, which will correspond to 0.1 ml.

U-40 usually have a scale from 0 to 40: each division is correlated with 1 insulin unit. To introduce 10 EI, you should also dial the solution to the figure 10. But here will be 0.25 ml instead of 0.1.

Separately, the amount should be calculated if the so-called "insulinka" is used. This is a syringe that contains not 1 cube solution, and 2 ml.

Calculation for another labeling

Usually, Diabetic has no time to walk along pharmacies and carefully select the necessary inventory for injections. Passing the term of the hormone administration can cause a sharp deterioration of well-being, in particularly difficult cases there is a risk of falling into anyone. If diabetics have a syringe at hand, intended for the introduction of a solution with another concentration, has to quickly recalculate.

If the patient is required to unitely introduce 20 EIs of the drug with the labeling U-40, and only the u-100 syringes are available, then not 0.5 ml of solution, and 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate it! You need to choose the same 20 EI.

How else use insulin syringes

ASD Fraction 2 is a well known to most diabetics. It is a biogenic stimulator that actively affects all metabolic processes passing in the body. The drug is produced in drops and is prescribed to insulin-dependent diabetics during type 2 disease.

ASD Fraction 2 helps reduce sugar concentration in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then syringe, if we are not about injections? The fact is that the liquid should not be contacted with air, otherwise the oxidation will occur. So that this does not happen, as well as for the accuracy of the reception, the syringes are used for the set.

Calculate how many drops of the ASD fraction 2 in "Insulinka": 1 division corresponds to 3 liquid particles. Typically, this amount is prescribed at the beginning of the drug, and then gradually increase.

Features of various models

Insulin syringes, equipped with removable needles, are on sale, and represent a one-piece design.

If the edge is soldered to the housing, the drug will be completely output. With non-removable needle, the so-called "dead zone", where part of the drug is lost. To achieve a complete removal of the medicine if the needle is removed, more difficult. The difference between the number of recruited and inaccurate hormone can reach up to 7 EI. Therefore, doctors advise diabetics to acquire syringes with non-removable needles.

Many use the injection device several times. Do it forbidden. But if there is no choice, then the needles are necessarily disinfected. This measure is extremely undesirable and permissible only if the syringe uses the same patient if it is impossible to apply the other.

Needles on "insulinks", regardless of the number of cubes in them shortened. The size is 8 or 12.7 mm. The release of smaller options is inappropriate, as some insulin bottle are equipped with thick traffic jams: you can simply not remove the medicine.

The needle thickness is determined by special labeling: the number G indicates near the letter G. It should be navigated when choosing. The thinner there is a needle, the less painful injection will be. Taking into account the fact that insulin is introduced several times daily, it is important.

What to pay attention to the execution of injections

Each insulin bottle can be used repeatedly. The remaining amount in the ampoule store should be strictly in the refrigerator. Before administration, the preparation is warmed to room temperature. To do this, take out the container from the cold and give to approximately half an hour.

If you have to use a syringe repeatedly, it must be sterilized after each injection to prevent infection.

If the needle is removable, then for a set of medication and its introduction, their different models should be used. It is more convenient to pick up insulin, and small and thin to make injections.

If you need to measure 400 units of hormone, then you can dial it in 10 syringes with the Marking U-40 or in 4 by U-100.

When choosing a suitable device for injection, it follows to:

  • The presence of a non-selected scale on the housing;
  • A small step between divisions;
  • Needle sharpness;
  • Hypoallergenicity of materials.

Inserting insulin follows a little more (for 1-2 EI), since some quantity can remain in the syringe itself. A hormone is accepted subcutaneously: for this purpose, the needle is introduced at an angle of 75 0 or 45 0. This level of tilt allows you to avoid moving into the muscle.

When diagnosing a diagnosis of insulin-dependent diabetes, the endocrinologist must explain the patient as and when the hormone must be introduced. If children become patients, then their parents paint the entire procedure. For a child, it is especially important to correctly calculate the dose of the hormone and deal with the rules of its administration, since a small amount of the drug is required, and it is impossible to allow it.