PEMZA brush and ordinary legs for legs: rules of use and the history of appearance. How to choose the leg pums

For most people, Puma are pieces, sliced \u200b\u200bfrom a domain slag or foamed concrete, again sliced \u200b\u200bwith pieces. However, these are not natural materials that can only be called pumice. Well, except that they are somewhat similar to this natural material.

How Puma is formed

Natural pumice is formed after the volcanic eruption and is a light glass mass foamed by bubbles dissolved in it gases. If it were not for gases, we would see instead of Pumise Obsidian, which is nothing but organic glass. To understand how Puma is formed, recall the carbonated water: when the bottle is opened, the pressure drops sharply, and the gases begin to stand out intensively. This process occurs during the volcanic eruption.

Physical properties Pumise

The properties of pumice are determined by the size and nature of the glass substance from which it is formed. The view of the pores formed in it is especially important. A small-faceted or large mineral may have the following structure:

• fibrous;
• bubble;
• cellular;
• foamy.

The colors of natural pumice are diverse, the spectrum can be in the range from bright to the darkest. The black color of the pumice speaks of the abundant saturation of the mineral substances of multiple iron oxides. If silicon melts with oxides of non-ferrous metals (nickel, titanium, calcium) are flooded in the breed, then the pumice will be blue or yellow.

PEMZE deposits

Phambes are produced using an excavator in the form of a varinforctive bulk material. It can also be produced by a handicraft method, which has been preserved for hundreds of years. Typically, large deposits are opened where the volcanoes are still active or were active recently. This is due to the fact that over the time of the deposition of PEMZES is destroyed, since they cannot withstand large pressure and high temperatures.

In Russia, the first-class material can be obtained in the Kamchatic fields of Pumices, but expensive transportation makes its price too high, which reduces the profitability of use. There is still a good quality material that is mined in the Caucasus.

Outside of Russia, the Armenian fields of Pumise will be noted on Mount Ararat, Italian pembassal deposits, from which islands in the sea Tyrrhensky, New Zealand and German, which are located in the Rhine Valley.

Use Pumise

Pumice - hard material, but soap did not yet invent, it was using her dirt from all over her body. And today, abrasives from Pumices include in elite natural products for skin cleansing.

The construction is also not necessary without this bulk material, which is filled with emptiness in the walls with certain construction technologies. This insulation perfectly retains heat, it is durable and not capricious: it does not fit and rodents do not like it, which is also important. Also, during the construction of buildings, pressed wall blocks from Pumise are used. True, such buildings must be faced with another material, since hygroscopic pumice. It is well tolerating moisture and freezing as such, however, in the pores there can be a moisture-loving microflora, which will cause the destruction of the material.

In mechanical engineering, crushed pimose is used for grinding work. In chemical production, it uses it as a substrate when filter, catalytic, as well as ion exchange mixtures are prepared. The industry includes the production of explosives: the dynamite is added to the dynamite powder, which serves as a peculiar catalyst for an explosion. The glass industry uses natural pums in the process of cooking glass for technical use.

Puma houses also come in handy

Few people will decide to put the house box of pembol or statuette, but there is one spectacular way to apply this mineral for florists. To create a beautiful green corner, you need to push the deepening in a large piece of pumice and put a tradescania in it. It will be perfectly feeling if it is impregnated with a nutrient solution and put moss.

Home cosmetologists have come up with their way to use PEMZE to improve appearance. Some mix pumice powder to a bold cream to get a natural scrub, and someone cooks homemade soap, introducing into it a crumb from Pumise. It is clear that the use of natural tools is fully justified, but you need to ensure that the crumb is not too large, otherwise you can damage the skin.

Related Materials

Many and do not guess, but pumose has a natural origin. Simply put, PEMZa is a porous piece of hardened volcanic lava. It seems that this is a completely old-fashioned agent and now there are plenty of funds that will cope with the firewood skin better, but no - pemba and to this day effectively removes the erased cells and softens the skin.

Especially PEMZA helps in getting rid of corns and natopesh - with regular use, it helps to forget about their existence forever. But then it is worth noting that the rapid result is hardly worth expecting, because for a complete effect you need to use PEMMU every day during a couple of weeks and only then reduce use to a preventive minimum - once a week.

Use of Pumice at home

It is worth considering the fact that the varieties of PEMZ exists a lot: some -, others - softer, but in any case you need to learn how to apply pemba correctly in order to avoid unforeseen damage.

Before applying Pumice, the skin must be cleaned and unpack, leaving it a little wet. Dry skin should not be, because then there will be no effect. Instead of conventional breaking in water, it is quite possible to use special steam baths with herbs (chamomile, etc.) or sea salt - it will contribute to the removal of fatigue.

It is allowed to use pimme exclusively on the hardened areas - according to the usual heels, as well as where corn and natopstys are available. Soft skin sections for this are completely unsuitable. Usually there is enough pairs of soft circular movements: if it is strongly crushed, open damage, ulcers, inflammation may appear. Therefore, as soon as the feeling of discomfort, burning, the procedure must be stopped.

At the end of each procedure, it is necessary to rinse the legs in order to wash off all the exfoliated skin cells and apply a nutrient cream. It will not allow further skin drying and helps to significantly soften it.

Although PEMZA is clear quite unsightly, do not forget that its effectiveness over time has not been changed. Therefore, it's just an ideal find for those who face dry skin problems: and calls, because it is regular care and the correct use of Pumice will help keep your legs in a well-groomed form.

Many people suffer from such, it would seem, a banal problem, like the cooler legs of the feet. Of course, you can simply not pay attention to it with the hope that it will pass by itself. But then natoptysh and corn appear, which leads to even big problems. It was then that we begin to look for a remedy that will help us to overcome all the troubles with the skin of the legs. Of course, you can buy creams or ointments, but they are often ineffective. And then we remember the unpleasant pebble, which for centuries was used for this purpose. It is often used for cosmetic purposes and allows them to always remain beautiful.

What is PEMZA?

When we hear the word "PEMZA", then immediately imagine the sharpened pieces of foamed concrete or a shaved house. But all these artificial funds have nothing to do with natural stone. In nature, PEMZ is a light glass mass that is erupted by a volcano. It is formed during foaming of gases that dissolve under the influence of temperature. The formation of Pumice is similar to how gas leaves from a bottle of carbonated water. Only in the second case, we obtain only harmless foam, and in the first - a complex and unsafe material in natural conditions.

PEMZA IN OUR HOUSE

Despite its inxperation, this porous pebble is often used for interior design. It often makes the basis for various floral decorations. To create a natural place for planting plants, you need to hollow in the stones. Small recesses.

But, of course, the pex for legs is most often used, more precisely for their recovery, the removal of the burdown layer, the fight against the corners and natopesh, the care of the skin of the feet.

Why do you need PEMZA?

Many believe that it has long ceased to be a relevant means for but it's not at all. Even today, when everyone can find in cosmetic stores a wide variety of creams, masks and oils, natural pums for the feet remains quite popular. She perfectly softens the skin, removing dead layers of the epidermis, which allows her to quietly compete with professional scrubs. It also helps to eliminate corn and natopstysh, make your skin more tender. That is why Pumice for the feet, the reviews about which indicate its effectiveness, remains the cheapest way to monitor the beauty of the feet. Of course, you should not expect a very quick result. You can see the first improvements only in about a week and only with daily use. And then it will be necessary regularly

How to use the pumice at home?

The appearance of this pebble does not particularly attract attention. In addition, many believe that the legs for the legs is quite a "aggressive" means. They say it may not have so much to benefit how much to harm. But such statements are capable of spreading only those who simply do not know how the pumice for the legs is used. How to use right?

1. Never use pums on dry sovereights. First, carefully clean them from dirt, steal in hot water and dry a little with a towel. You can add a seaside salt into the steam bath, various brave of herbs, starch. Thus, you will strengthen the effect of using pumice.
2. This tool can be applied only on those parts of the legs that have flavored or oroging skin. After you spend them on the feet and heels several times, you will immediately see a certain result. Demanding skin will simply start peeling. When you feel a little burning, immediately stop the procedure.
3. It is not recommended to use PEMMU. To achieve effect, you need 1-2 weeks to "wash" unnecessary skin, and after that, just to carry out preventive measures once every seven days.
4. After the completion of the procedure, be sure to rinse the legs with cool water and apply the nutrient cream.

How to choose the right pumice?

From irritation, corns and hoptes are also used pumice for feet. How to use it, was described above. This method is suitable for solving many problems with the skin of the feet and heels.

Now you need to learn how to choose this tool to care for the feet, because it is a good pumice for the legs to help avoid most problems with them. To date, you can choose any pumice that you can find in a cosmetic store, but avoid so-called unnatural, synthetic agents. First, they are inferior to natural in quality. Secondly, they are not so hard by their structure, so they break more often and crumble during use. Of course, try to choose such a product that will be comfortable to keep in your hand, as well as one that has small pores, as it will be more gentle to act on the skin.

Views PEMZ

To date, there are two types of pums: natural and artificial. Natural is more preferable, as it is made from volcanic rocks, it turns out porous and easy. It can be used to use allergies without any problems, as this is an ecological product that does not cause irritation and redness. Even if you accidentally injure the skin with natural pimples for the legs, you can not be afraid of inflammation. She also does not break. Despite all the advantages, she also has disadvantages: such a foot pumice is gaining water too quickly and then breathes a very long time, and this can lead to the fact that in its pores will multiply the microbes. Therefore, always follow the pumice to remain dry.

Artificial pumices are quite diverse. For example, you can find a soft tool that is more often used to reduce their condition after heavy physical work. Its features are: it does not swell, if you wet it, the microbes do not multiply in it, it can save its original view for a long time. But remember that artificial stone can crumble and cause inflammation on damaged skin.

Use Pumice for Pedicure

In order for the pedicure to be performed better, use PEMMU before the procedure. First, wash and raise your feet, then process all overwhelming pieces of skin. Rinse and dry your feet. Now you can handle the nails themselves and apply varnish on them. Remember that it is impossible to use PEMZE around the nails that are already covered with varnish.

Modern Pekme.

Today, besides ordinary pumice, you can buy various modern means, which also help to care for the skin of the feet and heels. So, for example, the so-called liquid pumice for the legs, which is sold in the form of scrub, has become great popularity. With the help of it, it is possible to deeply clean the skin, soften and moisten it. The main feature of such pumice is special powdered particles, which are exfoliated with flavored skin, make feet soft and gentle. The composition of the liquid pumice often includes propolis and beeswax, which increase the effectiveness of the means. Scrub should be applied to wet legs and massage for a few minutes, then wash off with water. After such a massage, it is advisable to apply cream on the skin.

No less popular is an electronic pumice for the legs. This is a special machine that is used before pedicure. With it, you can quickly and painlessly remove corn at home. It often has several special nozzles with different coatings so that the damaged skin is faster and easier shot. The roller can rotate up to 30 revolutions per second, although in some models the speed may be different. Rollers are replaced quite quickly, with just one click. The handle has an ergonomic form, so it is convenient to keep it. With the help of such electronic pumice, you can mitigate the skin not only on the legs, but also on the elbows or hands. The machine is often equipped with additional devices: brush for cleaning, batteries, instructions for use.

Around us a considerable thing that is so ordinary and simple that we do not think about the history and origin of these things.

Here, for example, let's talk about Pemba.

When we say "PEMZA", then most often meaning pieces of slightly trimmed blast slag or neatly sharpened bars of foamed concrete.

No relation to the real Puma, artificial materials do not have - although the minimum similarity in characteristics and origin is observed.

Natural pumice is a rapter glass foamed by a volcano, foamed by bubbles of dissolved gases. Without these gases, frozen mass, it would be quite possible, would turn into obsidian - brilliant mineral, strict beauty. Volcanic glass.

The process of formation of pumice is similar to the process of "eruption" of the gashed water from the bottle. A sharp decrease in pressure in both cases leads to the release of gases from the liquid. Only if we are talking about water, we get harmless foam. And if we are talking about volcanic lava, it turns out PEMZA - the material is useful, but in natural conditions is unsafe.

PEMZA (came in the XVIII century from the Netherl. Pums, from Lat. Pumex, single-handed with lat. Spuma, "foam" [; also frost) - porous volcanic glass, resulting from the release of gases with a rapid frosting of acidic and medium lava.

Texture of PEMZ from different deposits is different. For practical use, the size of the pores and the character of the glass substance, the foundation of the pumice is important. Distinguish finely and large coente stone. In this case, its breed may have a fibrous, or bubble, cellular, or a foam structure.

Most often, peumzes are extracted from the deposits of excavators as a varium-based bulk material. Handicraft developments are a quarry with fossil production technique, spent many thousands of years ago.

The color of natural pumice can range from white (silicon dioxide SiO2, a breed-forming substance, colorless) to black. Black pumice - product of abundant saturation of a substance based iron oxides (Feo, Fe2O3, Fe3O4). Blue and yellow pumice are formed as a result of mixing a silicon melt with oxides of non-ferrous metals, predominantly nickel, titanium, calcium.

The color of pumice, depending on the content and valence of iron, changes from white and bluish to yellow, brown and black. Porosity reaches 80%.

The hardness on the Moos scale is about 6, the density is 2-2.5 g / cm?, Volumetric weight of 0.3-0.9 g / cm? (Pumice floats in water, and not so much so much wet).

The large porosity of the pumice causes good thermal insulation properties, and the closedness of most pores is good frost resistance. Fire resistant. Chemically inert.

It is used as a placeholder in light concrete (pembobetone) as a hydraulic additive to cement and lime. As an abrasive material used for grinding metal and wood, polishing of stone products. It is also used for the hygienic removal of the flabby skin of the stop.

It often contains various crystalline inclusions - plug-inlazes, quartz, monoclinic and rhombic pyroxen, mica.

Variations are distinguished with fibrous, cellular, bubble and foam textures; The pumice structure can be large and fine-solid (Fig.).

The color of pumice, depending on the content of Feo and Fe2O3, changes from white and bluish to yellow, brown and black.

Density 2000-2300 kg / m3. Hardness 5-6.5. Chemically inert. Fire resistant.

Temperature interval 1300-1400 ° C. Chemical composition by R. Dali (%): SiO2 68-75; TiO2 tenths; AL2O3 11-14; FE2O3 0.8-2; FEO 0.5-1.5; CaO 0.2-2.5; Na2O 2.5-5; K2O 1.5-5; N2O + 1.5-3.

Puma lies in the form of covers and streams, and also lies the upper zones of extrusion domes and lava flows; It is formed as a result of the intake of viscous acid lava under surface conditions.

Pemba deposits are most common in the districts and modern volcanism areas. We are well known in Transcaucasia, in Kamchatka (the largest Zhepanskoye, Ilinskoe) and in the Kuril Islands.

In the chemical industry from pumice, filters are manufactured, used as an inert basis for various catalysts.

The largest area of \u200b\u200bindustrial consumption of Pumice - Stroy industry (large fraction fraction 5-20 mm) is also used as an abrasive in the wood and metalworking industry (for grinding and polishing metal, marble, bone, lithographic stone, etc.), in the chemical industry (for the manufacture of filters and drying preparations, as well as as an inert basis for various catalysts); In the oil industry (for cleaning oils).

Adding pumice to nitroglycerin explosives increases their detonation sensitivity. In addition, PEMZU is used in glass wool and when they receive glaze.

Natural pumice is produced where volcanic activity is active either recently (on geological standards) fade. Old postposition of pumice over time undergo cardinal changes: PEMZA, due to the characteristics of its structure, not too durable material, and long pressures are not tolerated with long heating.

Kamchatka fields of Russian pumice give first-class material, but the cost of transportation reduces the profitability of the operation of development. Es in demand and pumice produced in the Caucasus.

Considerable volumes of natural abrasive are mined outside the RF. Armenian, once spewed by Ararat, Puma. High demand is provided by Italian Phamber, from which the whole islands are folded in the Tyrrhenian Sea. The world market of Puma comes and Germany mining in the Rhine Valley, and New Zealand.

Prior to the invention, the pembal soap served as the main means of rubbing pollution from the human body. Pampus abrasives are used in cosmetics today, entering groups of elite natural goods.

In the industry, Puma is in demand in construction as a bulk filler of the average fraction. Building structures with natural pimes, warm and durable. Natural material does not fit, does not rot, not falling on rodents.

From the pressed pumice, wall blocks are made. However, the structure erected from pumice requires mandatory outdoor cladding: hygroscopic material. And although pumice satisfactorily transfers wet freezing, the unlunned stone quickly populates the moisture-lobby microflora and is subsequently destroyed.

In mechanical engineering, crushed pemps is used for grinding work. In the chemical production of pumice - the substrate for the preparation of filter, catalytic, ion exchange mixtures.

What is curious, do not cost without pumice and explosives manufacturers. The additive of the pampus powder to dynamite facilitates the initiation of an explosive device. The sand, identical in the composition of PEM, does not give such an effect.

The glass industry uses natural pums for cooking technical glass, mainly glazes for pipes and tanks.

Oddly enough, but a rigorous porous stone can serve as an interior decoration. More precisely, the basis for floristic decoration. To create a beautiful corner of nature, it is enough to hollow out in the stone a deepening for landing the tradescans, to impregnate monolith with a nutrient solution, put moss.

Medical cosmetology strongly recommends using natural pums to purify the skin from the burned layer. However, from the use of homemade soap (boiled on a chinese basis with the addition of dyes) with the adhesion of the pexic crumb, doctors warn: the unit inclusions of the stone in soap are capable of damaging the skin.

Not too numerous, but still there are on the market and decorative products from Pumise. Beads, brooches, as well as pyramids and just a wild pumose stone are usually tinted, vocked and ... successfully compete with products from much more expensive materials.

Puma is dangerous

Volcanic eruptions often produce truly huge amounts of pumice. Polwy, when a hot foam foam lava slowly pours out of the era. Much worse, if the flow of gases from the bowels takes into the sky to magma. Turning under low pressure conditions in pex, a light porous stone falls like a snow, shelting the ground surface.

Whole worse when the peppers "precipitation" are concentrated on the water. The pimples covered with pumice is isolated from light and atmospheric oxygen. All living in it will die.

Rivers carrying multi-meter "rafts" from pumice becomes dangerous to dams and other hydraulic structures. The boats and boats cannot swim in the "sea" of abrasive crumbs: the peumous crust is capable of a matter of miles to wipe through aluminum boards of freshwater vessels.

The most sad that nature forces with such cataclysms cope very slowly. Pumice, floating in the surface layer of water, collapses from friction and collisions, and ultimately settles at the bottom. But the process is this right.

But how to properly use PEMZA?

Let's talk about it separately and in more detail. Maybe the trifle, and maybe someone is very useful.
What exfoliation means combines simultaneously simplicity, availability and broad fame? That's right, it is a cosmetic pumice.

With its help, you can remove damage particles of the skin, corns and so-called natoptes. In a word, the very necessary thing in everyday life. And if you think that Puma entered the source only with the development of the cosmetic industry, then mistaken. She used our great-grandmothers, and unsuccessfully.

Then, when soap was not ...

After the eruption of the lava volcanoes, as cool, it turned into a porous breed, the structure of which resembles the emery-known paper known to us. Here is this frozen breed and there is a pumice. It is not known when it is, but our progenitors noticed that it is an excellent tool to cleanse the skin. Then there was no soap yet, and they used for these purposes with pimples.

As you can see, the history of using pumice is not only as a cosmetic, but also a hygienic agent goes back to ancient times. This natural substance having a characteristic rough surface, the ancestors used so virtuoso that there were no scratches on the body, not to mention more serious damage or bleeding.

Certificates have been preserved that the ancient representatives of beautiful sex used Phambes as a depilator - after all, there were no other opportunities for this.

What is interesting, this one would seem to be an outdated way of claimed today: many women prefer to remove hair on the legs of Pimse.
How it's done? The way is old as the world. First you need to break your feet, thoroughly lay them and then take circular movements on them, which should be lightweight, without much pressure. After that, the foam, of course, washed off and the remote hairs go along with it.

For sure, it is not known whether our leg great-grandmothers lubricated after the completion of the procedure. But the modern sequence of such a depilation method must necessarily apply a fat cream. And they do it right, because they thus prevent skin irritation.

Secrets of home use

At the same time, there are a lot of people who consider Phamba almost the relics who have learned their age and therefore not worth attention.
Others are not so categorical, but it is believed that it is unnecessarily aggressive and can deliver the skin a lot of unpleasant minutes. Nevers and those and others. Although, do not hide, in inept hands, she really can harm ...

In order for cosmetic pums to become your enemy, and gained a reputation as a reliable friend and assistant, it is necessary to adhere to simple rules for use at home.

So, this tool never applies dry. You must pre-wash your legs, unable to displesh them, and then slightly dry the towel. For the bath you can take simple water, and you can use additives, which will not be superfluous - sea salt or starch. Some prefer to add heralds of medicinal plants. The same chamomile, for example. Such a decoction perfectly affects the condition of the skin on the legs, removing the fatigue accumulated from them.

It is strictly not recommended to use peptems for soft and gentle skin sections. It itself is created for influencing rigid and flapped areas. Dead cells of the epidermis she removes very easily, for several simple movements. However, try not to overdo it: as soon as the processing of pimples, the feeling of burning is, the procedure immediately should be completed. This means that dead cells are "ended" and it reached sensitive skin layers.

There are quite a few cases (especially in rural areas, where people work for a long time in the field and go barefoot) when Pembia is used daily. It is rather a habit than the need, for this tool is not recommended for such a frequent use. The exception is except for the first two weeks, when a large "front of work" in the form of accumulated unnecessary skin is in front of the pumice. Then, when it is removed, Pumbe should use no more than two (sometimes three) times a week. For prophylaxis.

About the removal of calluses must be said separately. "To parse" with them is not one fell in one fell, but gradually, removing one small layer every day. Strong pressure is not welcome, as you can hook a healthy skin and provoke the occurrence of ulcers. Or infection and inflammation.

It is important not only skillfully and gently use the pumice, but also to properly complete the procedure for cleansing the skin. To do this, you need to rinse the legs with cool water and be sure to apply the cream-feeding cream on them. Adhering to these simple tips and recommendations, you avoid additional skin drying, it will not be rude.

How to choose a leg pumice?

Pumice for cosmetic purposes is natural and artificial. Manufacturers of the latter are usually reported from which synthetic materials it is made, so if you stop your choice on this option, at least make it consciously. But still I would like to warn you from artificial analogues, as there are many low-line fakes in their assortment. Such with the permission to say pumice in their structure less solid, they do not present all the properties of the natural agent. And they also break very quickly, not to mention that when using can harm the skin. Especially if you are allergic to that artificial material from which they are made.

Hence the conclusion: if possible, choose only natural pums!

And now I would like to draw the attention of our readers. Ease of use of this means and the effect of it dependes not only from the material and your skills, as well as on its shape. Therefore, when choosing Pumice "Scroll" with its palm. If it is convenient to keep in your hand, then buy! And, of course, take a look at the peres: what they are smaller on Phamber, the gentle it will handle your skin, giving her health and beauty.

Hurry leather stop is a common problem that gives women a lot of concerns. This cosmetic defect does not make it possible to wear open shoes and looks ugly on the beach. However, to cope with this disadvantage is quite valid by every girl. To do this, it is enough to use the usual pumice. Especially since today you can find many types of this simple tool.

What is a pumice for the legs?

Pumice is a substance that can have natural origin or manufactured from synthetic materials. This tool is solid and at the same time a porous structure. Due to this, it is possible to cope with the organized cells, soften and clean the skin. Pumice will remove corn, holoptyshi and give skin softness.

In the launched cases, you should not hope for an instant result. To achieve a noticeable effect, you need to carry out everyday procedures for a week. If the skin is in normal condition, then once a week will be enough.

What makes pums

Pumice is a volcanic glass having a porous structure. It is formed during the separation of gases in the case of the rapid pouring of the lava. The color range of this substance is determined by the valence of iron. It can be a drone or black. There is also a yellow, blue and even white pumice.

In this case, the legs for the feet is natural or synthetic. In the first case, it is possible to easily cope with the fracture particles of the skin. However, natural pumice has certain disadvantages. For example, it easily absorbs water and dries badly. Therefore, microbes are quickly multiplied in natural pumice. Such a tool should be periodically disinfected and change more often.

Artificial pumice does not absorb water, and therefore it does not reproduce the pathogenic microflora. In addition, this material will dry pretty quickly. It has a fairly delicate structure, but at the same time perfectly cleans the skin.

Also on sale you can find a lot of metal scrapers for legs. However, it is important to take into account that such adaptations are seriously damaged by the skin, and therefore they should be used extremely carefully.

How to use pumice and clean heels

So that the pumice does not damage the skin, this tool is very important to use correctly. Before starting the procedure, the skin must be unpiring for a few seconds. Circular movements should be performed to remove the flabbing particles. At the same time, it should not be pressed too much.

After the completion of the procedure, the legs need to be solid with cold water and treat them with moisturizing cream. Due to this, it will be possible to avoid drying.

In this case, the use of pumice is contraindicated in the following situations:

1. For processing too dry epithelium. Even an electrical tool in which it is possible to set the minimum mode of operation, can provoke discomfort and damage the skin if before starting the procedure not to make a steam bath. To increase its effectiveness, sea salt add to the water. Also, an excellent addition will become starch or a decoction made from chamomile.
2. For damaged areas. Pumice helps to cope with rough and rigid skin. It can be used to remove dead skin sections. If you use this tool for processing damaged zones, there is a risk of burning and irritation of the skin.
3. For everyday use. The main task of this device is to remove excess skin. After reaching the result, the use of pumice is recommended to reduce, since the aggressive procedure may damage the healthy skin.

What kind of pumose it is better to choose: Overview

Today, you can find a lot of types of pembiaries that help to cope with the skinny skin particles and not damage healthy areas.

Faberlic (Faberlik) double-sided brush

A double-sided brush perfectly removes flaming corn and natopstysh. With it, you can make the skin's skin much softer. Using a small peking, you can put in order to the skin, which is in hard-to-reach areas. The main pumice has two sides - a small and large grater.

This adaptation is made of stainless steel and rubberized plastic. To get the desired effect, it is recommended to treat the skin with pembia, then put on special silicone socks. Thanks to this, the skin will become more even and smooth.

Electric Scholl Velvet Smooth Pillet

Thanks to the use of a roller carrier, you can safely get rid of the upper layers of the skin, which will make the stops perfectly soft and gentle. To obtain an excellent result, the breaking procedure is not required - for this it is enough to handle rude areas to the roller.

Due to ergonomic shape, the process is significantly facilitated. Through the use of this tool, you can achieve truly accurate movements. The pedel is completely harmless, it does not leave damage on the skin and prevents inflammatory processes.

Ped Egg Stark

Due to the presence in this tool, special grinding plates can be deleted gently removed. As a result, you can get the most. This device has an original form in the form of an egg. And due to ergonomic design, its use is significantly facilitated. Such a grater turns everyday leg care in pleasure.

When removing the flabby skin, its particles fall into a special container. Thanks to this, the grater can be easily used in any atmosphere. There are more than 135 plates with a grinding effect on the working surface, and therefore it is possible to carefully clean the skin without damaging it.

Natural PEMZA

Natural pumice helps to gently remove the flabbing particles of the skin. Thanks to this procedure, it is possible to clean the pores, stimulate active points, improving the work of the whole organism. Natural pums are made from volcanic lava, which makes it amazingly resistant to various factors.

With systematic use of this fund, it is possible to permanently cope with the problems of stop and get soft and gentle heels.

Trucks for legs equipped with an abrasive sticker are recommended for dry polishing. And they are suitable for the already processed skin. Such a grater should have a plastic base, since the wooden material will turn the mold over time. Artificial pumose is made from polymeric materials. What advantages does she have? Watch the video: