In childhood, all at least once mastered airplanes from empty packs from cigarette. This toy has been many years old, but despite this, it still pleases the children and can take the benefit of adults who want to remember childhood and make it possible to make an airplane from empty cigarettenoah bucket. Make such a craft is very simple - each of you can cope with this from the first time.
Instruction
- Take a pack from cigarette And divide neatly glued fragments. Make out bucket Scan, and foil and put the foil. All small details bucket Should remain integer.
- Divide the scan on the part - separate the two bases, the back side, the front side, as well as the inner part. Front part Put in front of yourself and bend its corners inside the same way as the wings bend for a paper pigeon.
- Now take the back bucket And give her a cylindrical shape. Side edges Beat outward so that four end-sticking end. Raise the ends and connect them together.
- In the wings that you have turned out from the front, in the middle, do the longitudinal gap and insert the cylindrical item into this slit using the bent edges raised upwards. Roll into the edges to get chassis.
- Now take the top cigarettenoah bucket And give it a cylindrical shape. Do the narrow slit in its inner part and tighten the side edges to get a tail and turbine.
- Tail and turbine Insert the aircraft in the body behind the wings. Turbines place on the bottom plane of the aircraft, behind the chassis. The tail should stick over the airplane up.
- Of cigarettenoah foil turn the dense cone, the base of which is equal to the cylindrical diameter of the fuselage. Tightly insert the cone into the fuselage hole, which coincides with the plane's nose and secure. Your fighter aircraft from bucket Ready!
Sometimes, when boredom attacks, a hidden genius wakes up in our consciousness, requiring something to create something. Here the look falls on the packaging of cigarettes and the question involuntarily arises - "how to make a plane from a pack of cigarettes?". By the way, various crafts can be made from empty cigarettes. It may be not only an airplane, but also a tank. And the robot from the packs of cigarettes will look at all as a work of art.
In this article, we will not tell me how to make a robot, as it is a lesson for advanced masters. But we decided to help those who think about how to make a plane - a fighter from a pack of cigarettes.
Necessary materials and preparation for work
Make a bunch of cigarettes such a thing like a plane is a matter that requires time and attention. To do this, you will need:
- empty packaging from under the papyros;
- glue;
- scissors.
To begin with, carefully expand the packaging. It must be done in such a way as not to damage its integrity.
Foil does not need to throw out - we will use it in the future. Expanded packaging must be divided into several separate elements. They should be:
- base;
- second base;
- front end;
- inner part;
- rear part.
All items need to be decomposed so that you know from where every detail was taken from. We will start work.
Production of details
Let's start creating and connecting parts:
- Wings and chassis. Take the front part and maintain its angles inside. In this way, you created wings. Next, we need to be needed the back, it must be bent in the form of a cylinder, and the side edges bent outward. They must speak on the sides. Then they need to raise and connect together. In the wings, you need to make a hole in which the back part will be inserted. To make the chassis, you need to straighten the edge that you rendered at first.
- Tail and turbine. Fold the top into the cylinder. Inside, do a narrow hole and tighten the side edges. As a result, something resembling a tail and turbine should be obtained. Then we take the upper part and insert it into the rear, chok on the wings. Turbines must be where the back of the chassis is located. The tail must rise over the aircraft.
- Nose. The last step is the nose. Here we use the foil, which we postponed in advance. It takes a dense cone from it. Its size should be identical fuselage. The foil cone should be inserted into the hole of the fuselage in the front of the aircraft. This turns out the nose.
Check that all the elements of the aircraft are firmly connected to each other. Job is done!
If boredom will attack you again, then you can experiment with the details, bending them in another way or changing their size.
Now you know that you can independently make from a unnecessary pack of cigarettes. Include your fantasy and do not be afraid to experiment.
doloykurit.ru.
Sometimes, when boredom attacks, a hidden genius wakes up in our consciousness, requiring something to create something. Here the look falls on the packaging of cigarettes and the question involuntarily arises - "how to make a plane from a pack of cigarettes?". By the way, various crafts can be made from empty cigarettes. It may be not only an airplane, but also a tank. And the robot from the packs of cigarettes will look at all as a work of art.
In this article, we will not tell me how to make a robot, as it is a lesson for advanced masters. But we decided to help those who think about how to make a plane - a fighter from a pack of cigarettes.
Necessary materials and preparation for work
Make a bunch of cigarettes such a thing like a plane is a matter that requires time and attention. To do this, you will need:
- empty packaging from under the papyros;
- glue;
- scissors.
To begin with, carefully expand the packaging. It must be done in such a way as not to damage its integrity.
Foil does not need to throw out - we will use it in the future. Expanded packaging must be divided into several separate elements. They should be:
- base;
- second base;
- front end;
- inner part;
- rear part.
All items need to be decomposed so that you know from where every detail was taken from. We will start work.
Production of details
Let's start creating and connecting parts:
- Wings and chassis. Take the front part and maintain its angles inside. In this way, you created wings. Next, we need to be needed the back, it must be bent in the form of a cylinder, and the side edges bent outward. They must speak on the sides. Then they need to raise and connect together. In the wings, you need to make a hole in which the back part will be inserted. To make the chassis, you need to straighten the edge that you rendered at first.
- Tail and turbine. Fold the top into the cylinder. Inside, do a narrow hole and tighten the side edges. As a result, something resembling a tail and turbine should be obtained. Then we take the upper part and insert it into the rear, chok on the wings. Turbines must be where the back of the chassis is located. The tail must rise over the aircraft.
- Nose. The last step is the nose. Here we use the foil, which we postponed in advance. It takes a dense cone from it. Its size should be identical fuselage. The foil cone should be inserted into the hole of the fuselage in the front of the aircraft. This turns out the nose.
Check that all the elements of the aircraft are firmly connected to each other. Job is done!
If boredom will attack you again, then you can experiment with the details, bending them in another way or changing their size.
Now you know that you can independently make from a unnecessary pack of cigarettes. Include your fantasy and do not be afraid to experiment.
Cystitis during pregnancy: to cure and prevent repeated development can be pregnant during cystitis
Is it possible to make a pregnant cherry?
Cesarean without indications possible operation?
Cesarean section: from preparation for surgery before extracting from the maternity hospital What you need to make caesarean section
Menstrual-like bleeding in the middle of the cycle